Page 4 - DIN semi bases

Gears & Fuse Gears
Gears & Fuse Gears

Semiconductor Fuses

AC+DC Square-boby Fuse Bases
Bases for PSC ranges: SI TT, SI 000/00, SI DIN

STANDARD VERSION SI FUSEHOLDERS
Connection dimensions
D
SI TT

Designation A B C D E G L M F Catalog Number
118(30) 83 (30) 42(30)
SI TT 30/31 170 4 50,6 202 M8 57
123(31) 88 (31) 51(31)
118(70) 83 (70) 42(70)
SI TT 70/71 193 4 74 225 M8 67
123(71) 88 (71) 51(71)
137(32) 93 (32) 60(32) M10 (32)
SI TT 32/33 145(33) 170 109 (33) 75(33) 6 50,6 202 M12 (33) 57
137(72) 93 (72) 60(72) M10 (32)
SI TT 72/73 193 6 71 225 67
145(73) 109 (73) 75(73) M12 (33)
Partition mounting not possible. Panel drilling: 25x30 mm
SI 00 DIN 80 SI 000 DIN 80

Designation A B C D E G L Fuse sizes Catalog Number
000-17x49-27x60
SI 000 DIN 80 100 80 80 19 25 80 100
DIN 80
00-27x60
SI 00 DIN 80 133 130 46.5 79 148
DIN 80
Partition mounting only for SI 00 DIN 80
* Electrical connection of fuse and fuse holder via supplied studs, nuts and washers
Maximum recommended tightening torque: 13.5 Nm for M8 screws.
26 Nm for M10 screws.
46 Nm for M12 screws.
- Fixing of base on plate or bar via screws not supplied.
M6 for SI 000 and SI 00 Tightening torque 7 ± 15 Nm.
M8 for SI TT Tightening torque 10 ± 2 Nm.

FG210 12/04