Page 9 - In-line-II-Vertical-Strips

INTRODUCTION
—
High performance
Ready to meet current and future requirements
Robust operation in a wide variety of
applications
Available as 160A, 250A, 400A and 630A types in
combination with NH/DIN HRC Fuse Links
according to EN/IEC 60269. InLine II has been
type tested in accordance to EN/IEC 60947-3. The
variants BZL and BZH have current ratings up to
2500 Amperes.
Ready for high voltage trends
InLine II provides safe and reliable switching and
protection for demanding applications such as
photovoltaic installations and battery energy
storage systems. The rated voltages are up to 1000
V AC, AC-22B utilization category, with a rated
operational current of up to 630 A. The short circuit
protection level is up to 120 kA.
Up to
1000 V AC
ratings, utilization
category AC-22B
Short circuit
capacity up to
120 kA
for fuse switch disconnectors
800 V AC Fusegear
09
01
Reliable in extreme conditions
The InLine II Cu+ variants have been designed for
use in installations with ambient temperature up
to 55°C (131°F), without derating.
The newest BZH1600A-S-T-3P-MB is a single
switch disconnector rated to withstand short
circuits up to 40 kA, 1s, using 27% less width
compared to alternative solutions.
Suitable for
temperatures up to
55°C (131°F)
without derating
Designed to keep cool
InLine II has been designed to give the most
optimized ventilation of the switches to prevent
overheating. An integrated ventilation channel at
the side of the body will also support the air
ventilation upwards between the switches when
they are installed side by side.
InLine II Cu+ for high ambient temperatures