Page 2 - Surge-Protection-E_0.pdf
P. 2

New Products +


        DEHNcombo                                                        32
                        • Prewired type 1 + type 2 combined lightning current and surge
                         arrester for use in photovoltaic generator circuits
                        • Approved fault-resistant Y circuit prevents damage to the surge
                         protective device in case of insulation faults in the generator circuit
                        • Rated voltage is the same for all modes of protection and, therefore,
                         the arrester can also be used in earthed systems



        DEHNguard modular ACI                                            52
                        • New technology “Advanced Circuit Interruption“ (ACI) integrated in
                         the protection module, consists of a switch / spark gap combination
                        • Due to ACI technology no external backup fuse required
                        • Small connection cross-sections (6 mm² Cu) absolutely sufficient
                        • TOV withstand also at 440 V (AC)


        DEHNcord 3P TT 275 FM                                            78
                        • Compact three-phase arrester for all installation systems
                        • Mounted on DIN rails or, in confined spaces, using screw lugs
                        • Visual fault indication
                        • Compact design



        DEHNdetect                                                      117
                        • Lightning current measuring system to prevent subsequent damage
                         in wind turbines
                        • Reduction of maintenance / repair costs
                        • Reduction of downtime



        BLITZDUCTORconnect – Modular                                    156
                        • Combined lightning current and surge arrester in modular design
                        • With push-in connection technology and disconnection function
                        • With vibration-proof secR module locking
                        • Integrated LifeCheck and visual status indication




        BLITZDUCTORconnect – Compact                                    182
                        • Combined lightning current and surge arrester in a compact
                         enclosure
                        • With push-in connection technology
                        • Integrated LifeCheck and visual status indication




        DEHNbox TC B 180                                                220
                        • Compact surge arrester in a surface-mounted plastic enclosure
                        • High-performance protection of telecommunications interfaces
                         at the boundaries from LPZ 0A to 2
                        • Suitable for wall mounting, IP 20




        Condition Monitoring System LifeCheck for BLITZDUCTORconnect    236
                        • Two-part monitoring unit in a compact enclosure
                        • Condition monitoring of arresters of the BLITZDUCTORconnect series
                         with integrated LifeCheck
                        • Quick and easy installation and commissioning (without addressing
                         arresters)
                        • Remote signalling via floating remote signalling contact (nc)
   1   2   3   4   5   6   7