Page 236 - Surge-Protection-E_0.pdf

Shield Connection Systems and Enclosures

Shield Connection on DIN Rails
• Lightning-impulse-current-tested up to 5 kA (10/350 µs)
• Corrosion-resistant stainless steel
• Spring element ensures permanent shield connection

The lightning-current-tested DIN rail mounted shield connection system
for a wide range of applications is ideally suited for small cable diameters
such as bus cables. As, in the course of time, the conductor materials are
Lightning current carrying DIN rail mounted shield connection system, ideally suit- subject to a yield, this is compensated by a slipping spring element. The
ed for small cables. Slipping spring element compensates the yield of the cable shield connection can also be isolated from local potential by means of
materials. an adequate insulating element.

Shield Terminals
919 010 SAK 6.5 SN MS
919 011 SAK 11 SN MS
For DIN rails.
919 010 4013364071612 04 02 10 01 13 g
4,95 €
919 011 4013364071605 04 02 10 01 28 g
5,55 €
Type SAK 6.5 SN MS SAK 11 SN MS
Part No. 919 010 919 011
Lightning impulse current carrying capability (10/350 µs) 5 kA 5 kA
Clamping range (Rd) 1.5-6.5 mm 5-11 mm
Material nickel-plated brass nickel-plated brass
For mounting on SN 18x3 CU 1000 SN 18x3 CU 1000
Dimensions (W x L x H) 10 x 25 x 40 mm 17 x 25 x 47 mm

Busbar
919 016 SN 18X3 CU 1000
Mounting rail for shield terminals. Can be mounted onto busbar supports.
919 016 4013364071551 04 02 10 01 481 g
37,20 €
Type SN 18X3 CU 1000
Part No. 919 016
Material tin-plated copper
For mounting on busbar supports
Dimensions (W x L x H) 18 x 1000 x 3 mm

Rail Support with One-sided / Two-sided Contact
919 012 SH1 18X3 ST 919 013 SH2 18X3 ST
Rail support suitable for DIN rail mounting. Low-impedance connection of the shield terminals to the DIN rail via the busbar.
919 013 4013364071582 04 02 10 01 55 g
919 012 4013364071599 04 02 10 01 40 g 8,85 €
7,75 €
Type SH1 18X3 ST SH2 18X3 ST
Part No. 919 012 919 013 (
Version one-sided contact two-sided contact
Material tin-plated steel tin-plated steel
For mounting on 35 mm DIN rails acc. to EN 60715 35 mm DIN rails acc. to EN 60715

Insulated Rail Support
919 014 SH 18X3 K
Insulated rail support for DIN rail mounting or screw connection.
919 014 4013364071575 04 02 10 01 5 g
5,00 €
Type SH 18X3 K
Part No. 919 014
Material plastic
Colour black 1
For mounting on DIN rails or mounting plates
Shield Connection Enclosures 919 015 AK 35 SN 18X3 GG Terminal

919 015 4013364071568 04 02 10 01 15 g Particularly suited for indirect shield earthing.
5,00 €
Type AK 35 SN 18X3 GG
Part No. 919 015
Cross-sectional area 35 mm 2
For mounting on busbars
232 You will find detailed product information on our website Valid as of August 1, 2020