Page 6 - MCCB-XT2-XT4
P. 6
ABB | SACE Tmax XT
Introduction
1 - Contents
Overview This manual describes the characteristics of the Ekip Touch Trip units installed on SACE Tmax XT2-XT4
CB, among which:
1. general overview:
2. management operations: putting into service, maintenance, troubleshooting
3. operating conditions
4. consultation of menus for changing parameters and displaying measurements
5. accessories
Firmware This manual is updated to firmware version 3.12
recipients This manual refers to two user profiles, as defined by standard IEC 60050:
• skilled person, in the electrical field (IEV 195-04-01): person with relevant education, training,
knowledge and experience to enable him or her to perceive risks and to avoid danger which
electricity can create
• instructed person, in the electrical field (IEV 195-04-02): person adequately advised or supervised
by electrically skilled persons to enjable him or her to perceive risks and to avoid danger which
electricity can create
IMPORTANT: operations which can be performed by persons trained on the subject of
electricity are specifically indicated in this manual. All the remaining operations described
in this manual must be performed by skilled persons, in the field of electricity. ABB
declines all liability for damage to persons or property caused by failure to comply with
the instructions in this document.
Specifications and supporting To ensure that Ekip Touch is installed and configured correctly, please read the information in this manual
documents and in the technical documentation of the product, available in the website ABB liBrAry
Document Code Description
Technical catalogue 1SDC210100D0201 CB SACE Tmax XT general catalogue
Wiring diagrams 1SDM000068R0001 CB SACE Tmax XT2-XT4 Wiring diagrams
1SDH000721R0001
Installation instructions CB SACE Tmax XT2 Installation instructions
1SDH000721R0002
1SDH000722R0001
Installation instructions CB SACE Tmax XT4 Installation instructions
1SDH000722R0002
Communication System Interface SACE Tmax XT
System Interface 1SDH002031A1002
CBs
Design notes The information in this manual was written in Italian and then translated into other languages to conform
to the laws and/or commercial requirements concerning the product.
4 | © 2022 ABB | 1SDH002031A1002 - ECN000212994 Introduction | 1 - Contents
