Page 238 - dehn-catalogue-lightning-protection_3
P. 238

Fixed Earthing Terminal / Wall Bushings

                         Type K
        478 200   EFPK M10 12 V4A L230 STTZN
                         With plastic ring and connecting shaft (l = 180 mm, Ø10 mm).
        478 200   4013364035652  01 05 01 01   263 g   10
        pc(s)  26,27 €
                          Part No.                    478 200
                          Connection thread           M10 / M12
                          Material of plate           StSt (V4A)
                          Material No.                1.4571 / 1.4404 / 1.4401
                          ASTM / AISI:                316Ti / 316L / 316
                          Material of shaft           St/tZn
                          Connection plate Ø          46 mm
                          Short-circuit current (50 Hz)  (1 s; ≤ 300 °C)  6.5 kA
                          Standard                    EN 62561-1
                          PU
                                                      10 pc(s)
   Fixed Earthing Terminal /   Wall Bushings  478 098   SSP D90 H20  Accessory for Fixed Earthing Terminals

                         Foam pad

   2    478 098  pc(s)  1,55 €  4013364337411  01 05 01 01   8 g   10   Foam pad is attached to the yellow protective cover of the fixed earthing terminal (see installation instructions DS1476). One side adhesive,
                         with pull-off tab.
                         Using the foam pad enables a position compensation of approx. 20 mm at the formwork and makes it easier to find and expose the fixed
                         earthing terminal after concreting.
                          Part No.                    478 098
                          Diameter Ø                  90 mm
                          Height                      20 mm
                          PU                          10 pc(s)



                         Fixed Earthing Terminal M16

                         With M16 connection thread for higher current loads (50 Hz), e.g. for connecting the ring equipotential bonding system with the earth-ter-
                         mination systems of power installations with nominal AC voltages over 1 kV (transformer earthing).

        478 027   EFP M16 V4A SL400
                          Part No.                    478 027
                          Connection thread           M16
            478 027
                          Material of plate           StSt (V4A)
                          Material No.                1.4571 / 1.4404 / 1.4401
        4013364125995  01 05 01 01   603 g  1   pc(s)   66,74
        €
                          ASTM / AISI:                316Ti / 316L / 316
                          Material of cable           Cu/gal Sn
                          Cross-section of connecting cable  70 mm²
                          Length of connecting cable  400 mm
                          Diameter Ø connecting cable  10.5 mm
                          Connection plate Ø          80 mm
                          Standard                    EN 62561-1
                          Short-circuit current (50 Hz)  (1 s; ≤ 300 °C)  11 kA
                          PU                          1 pc(s)


                         Connecting Clamps for Fixed Earthing Terminals and Reinforcements

                         For connecting the reinforcement with clamping piece.
                         For round conductors or fixed earthing terminals with simultaneous fixing in the formwork.
                         Arrangement:
                         (II) = parallel
                         (+) = cross

            308 035
            VK 6.22 FL40
            KB6.10 BSB   For small diameters
            STBL
                          Part No.                    308 035
            308 035
                          Material                    St/bare
        4013364123472  03 01 01 01   165 g  25   pc(s)   4,52
        €
                          Clamping range Rd / Rd      (+/II) 6-22 / 6-10 mm
                          Clamping range Rd / Fl      (+) 6-22 / 40 mm
                          Screw                       di M10 x 60 mm
                          Standard                    EN 62561-1
                          Short-circuit current (50 Hz)  (1 s; ≤ 300 °C)  1.0 kA
                          PU                          25 pc(s)




        234              Detailed product information can be found on our website              Valid as of March 1, 2020
   233   234   235   236   237   238   239   240   241   242   243