Page 181 - Elsteel Constructor Catalogue

ORDER INFORMATION

DESIGN PROTECTED
OMNI BUSBAR HOLDER 800
(FOR INSULATED Cu)

OMNI SKINNE HOLDER 800
(TIL ISOLERET COBBER)

Center bolt must be used for
I = 50kA and higher
cw
2 TYPE DESCRIPTION LENGTH Cu SIZE CONDUCTORS CENTERS WEIGHT ORDER No.
MAX. QTY.
MAX.
PHASE
RAIL
(kg)
PER PHASE
I-Cu OMHI 8-1 OMNI BUSBAR HOLDER 800 190 10×100 4 80 2.76 21560
OMHI 8-2 OMNI BUSBAR HOLDER 800 390 10×100 4 80 3.02 21561
For above 5000A, OMH 8-4 must be used
INSULATED BUSBAR SYSTEMS
DESIGN PROTECTED
OMNI BUSBAR HOLDER 800
(FOR INSULATED Cu)

OMNI SKINNE HOLDER 800
(TIL ISOLERET COBBER)

Center bolt must be used for
I = 50kA and higher
cw
MAX. QTY.
RAIL MAX. PHASE WEIGHT
TYPE DESCRIPTION CONDUCTORS ORDER No.
LENGTH Cu SIZE CENTERS (kg)
PER PHASE
OMHI 8-3 OMNI BUSBAR HOLDER 800 390 10×100 6 80 4.53 21562

CENTER BOLT

CENTER BOLT

×10 Nos.
TYPE DESCRIPTION Cu SIZE WEIGHT (kg) ORDER No.
CBOL 20 CENTER BOLT M10×200 10×80 0.14 20254
CBOL 22 CENTER BOLT M10×220 10×100 0.16 20255

Note : For Busbar Guide please refer page no. 6:06 to 6:12
For full technical specifi cation, please refer to relevant design verifi cation on www.elsteel.com
IEC 61439-2 requirements regarding busbar clearances must be followed when installing any busbar system.

3;8: Released : 10-2021