Page 352 - IPD Product Catalog V17

Metal Enclosures

MILD STEEL ENCLOSURES

GENERAL ENCLOSURE SELECTION GUIDE (RECOMMENDED)

Stainless Steel
Installation Environment Mild Steel
or Polymer
Indoors – normal environmental conditions, low dust, dry ✓ ✓

Outdoors* – normal environmental conditions, minimal road pollution, no chemical exposure, moderate temperature, ✓ ✓
low dust, minimal direct sunlight, dry

Indoors – exposure to chemicals and high humidity, dusty ✓ ✓

Outdoors – exposure to sea air/sea breeze, high temperatures, direct sunlight ✓ ✓

Outdoors – direct sunlight, dusty, wet ✓ ✓

* The use of a canopy is recommended when installing Mild Steel enclosures outdoors.

Features:
Material: Cold-rolled steel
Thickness: 1.2mm 200H x 200W to 600H x 600W
1.5mm 600H x 600W to 1400H x 1200W
Mounting Plate: 2mm galvanised sheet
Sizes above 800mm height have folded edges for
higher rigidity
Depth adjustable in 12.5mm increments (Depth
adjusting Brackets required)
Construction: Totally welded cabinet. Wall mounting by 4 x Ø9mm
holes
Double fold to prevent water from entering cabinet
also acting as a gutter
Earthing stud standard. Drainage hole on the base of
cabinet to prevent condensation
Door: 110˚ reversible opening. Welded reinforcement profiles
for fitting accessories
Concealed and removable hinges with quick
assembly and disassembly pins
Continuous polyurethane sealing gasket for
higher IP rating
Lock: Metal 5mm double bit lock
Three point locking rods for cabinets of 1000H or
greater as standard
Other lock options available
Finish: Coated in Hardened Grey (RAL 7035), UV Tolerant
Polyester Powder coat or Orange (RAL 2008) Epoxy
Powder coat Corrosion resistance
according to UNE-EN62208
Ratings & IP55 / IP66, UNE-EN 62208 & UNE-EN61439-1-3,
UL508A,
Approvals: Bureau Veritas according to UNE-EN62208

352 1300 556 601 | ipd.com.au | V17-R05