Page 577 - IPD Product Catalog V17

Sensors

ABSOLUTE SHAFT ENCODERS - MODEL 958 & A58SE

MODEL 958 - SINGLE TURN ABSOLUTE ENCODERS
Features: Supply Pulses per
- Stainless Steel body Ø 58mm Voltage DC Output Mounting Solid Shaft Revolution Part No.
- Industrial grade, heavy duty housing (V) Type Size (mm) (PPR)
- Pre-wired 2m cable connector 360 (9 Bit) 958B6F26S0360CWPPSG2STIP65
- IP65 degree of protection Binary 500 (9 Bit) 958B6F26S0500CWPPSG2STIP65
- Incorporates Opto-ASIC technology Clockwise 6 1000 (10 Bit) 958B6F26S1000CWPPSG2STIP65
- Operational temperature from 0°C to +70°C Increasing
4.75 - 24 When Servo 4096 (12 Bit) 958B6F26S4096CWPPSG2STIP65
Viewed Flange 360 (9 Bit) 958B10F26S0360CWPPSG2STIP65
from Shaft 500 (9 Bit) 958B10F26S0500CWPPSG2STIP65
End 10 1000 (10 Bit) 958B10F26S1000CWPPSG2STIP65
4096 (12 Bit) 958B10F26S4096CWPPSG2STIP65
- Other variations available on request

DIMENSIONS - SYNCHRO FLANGE TYPE (26)
Model 958
Servo Flange

4

MODEL A58SE - ETHERNET ABSOLUTE ENCODERS
Features: Supply
- Solid shaft Ø 10mm Voltage DC Output Mounting Communication Part No.
- Size of body Ø 58mm (V) Type Protocol
- RNB bus cover with 3 x M12 connector Binary
- Maintenance-free and environmentally friendly 10 - 32 Single Turn Clamping PROFINET A58SE10MH1600PNWBV4RNB
magnetic design (16 Bit) Flange
- Shaft loads up to 400N - Other variations available on request
- IP65 degree of protection
- Operational temperature from -40°C to +85°C
DIMENSIONS - CLAMPING FLANGE (MH)
54.9 [2.161]
54.9 [2.161]
54.9 [2.161]
43 [1.693]
43 [1.693]
43 [1.693] 20 20 20 20 20 20
35
35 [1.378] [0.787] [0.787]
35
1.5 [0.059]
1.5 [0.059]
1.5 [0.059] 10.1 [0.398]
10.1 [0.398]
10.1 [0.398]
3 [0.118]
3 [0.118]
3 [0.118]
3 [0.118]
3 [0.118]
10 [0.394]
10 [0.394]
L1 L1 L1 40.5 [1.594]
40.5 [1.594]
40.5 [1.594]
L2 L2
0.00
35.96 + - - 0.05 M3x0.5-6H
35.96 + 0.00
0.05
[ 1.416] 8 [0.315] 6x @60
M4x0.7-6H
Model A58E D D d d 8 [0.315] 6x @60
Clamping Flange SEE SHAFT OPTIONS 48 48 48
[ 1.890]
58 58
[ 2.283]
53.50 + 0.00+ 0.00 59 [2.323] 7.5
53.50
0.05
59 [2.323]
- 0.05
-
59 [2.323]
[ 2.106] 15
- Primary dimensions are in mm, and secondary dimensions within brackets are in inches
- All dimensions are in imperial and metric with a tolerance of 0.005" (±0.127mm) or 0.01" (±0.254mm) unless otherwise specified.
1300 556 601 | ipd.com.au | V17-R05 577