Page 91 - Changeover switch

ABB TRANSFER AND CHANGE-OVER SWITCHES 91

—
Ordering information
Accessories

Terminal shrouds
Transparent plastic, snap-on mounting to the switches, IP20. The full shrouding of a 3-pole change-over switch is
achieved with four 3-pole shrouds.*
Weight/
OTS_T3 Suitable for Units/type unit
switches Type Order number pcs kg
For three pole switches
OTM40...125F_CM OTS125T3 1SCA022379R9680 1 0.03
For fourth pole 04
OTPS60FP, OTPS125FP OTS125T1 1SCA022379R9760 1 0.03

Terminal clamp sets
OTS_T1 Weight/
Suitable for Contact Units/type unit
switches function Type Order number pcs kg
Terminal clamp sets for Al- and Cu-cables insulated versions
OTM40...125F_CM 16...50 Al / 2.5...50 Cu OZXT1 1SCA022469R6310 3 0.06
OTM63...125F_CM 16...120 Al/Cu OZXT2 1SCA022620R7200 3 0.21
OTM63...125F_CM 2x(16...50) Al/Cu OZXT3 1SCA022639R0720 3 0.21
Including 0.75...2.5 mm2 voltage sensing connection. Voltage sensing wires are not included in the delivery
OTM40...125F_CM 16...50 Al/2.5...50 Cu OZXT6 1SCA122537R1001 3 0.06
Terminal clamp sets for Al- and Cu-cables
OZXT1
OTM40...125F_CM 10...70 Al/Cu OZXL1 1SCA022439R6770 3 0.14
Parallel connection kits
Finger protected connection bars for parallel connection of the upper or lower terminals. The bars accept
additional cables, the maximum size is stated below.
Weight/
Suitable for Cable crosssection Units/type unit
switches mm 2 Type Order number pcs kg
OTM40F3CM_ 2.5...25/2x2.5...16 OMZC003 1SCA121324R1001 1 0.5
OZXT2...3
OTM40F4CM_ 2.5...25/2x2.5...16 OMZC004 1SCA121325R1001 1 0.65
OTM40…125F3CM_ 10...70 OMZC03 1SCA117037R1001 1 0.5
OTM40…125F4CM_ 10...70 OMZC04 1SCA117038R1001 1 0.65
* Terminal shrouds can also be mounted on parallel connection kits.
Parallel connection kit cannot be used with 2 pole devices

OZXT6

OMZC_