Page 303 - Din prodcuts 2020

2/111

— 2
RCBOs
DS 200 technical features

DS 200 AC DS 200 A DS 200 M AC DS 200 M A
Standards IEC/EN 61009-1; IEC/EN 61009-2-1; IEC/EN 60947-2
Electrical Operating characteristic: type (wave form of the earth leakage sensed) AC A AC A
features Poles 2P, 3P, 4P
Rated sensitivity IDn A 0.03
Rated current In A 6 ≤In ≤ 63 
Rated voltage Ue 2P V 230-240
3P, 4P V 230/400 - 240/415
Insulation voltage Ui V 500
Operating voltage of circuit test Ut 2P V 110 (170 for 30 mA) - 254
3P V 195 (300 for 30 mA) - 440
4P V 195 (300 for 30 mA) - 440
Rated frequency Hz 50…60
Rated breaking capacity acc. to IEC/EN 61009 ultimate Icn A 6000 6000 10000 10000
Rated breaking capacity ultimate Icu kA 10 10 15 15
acc. to IEC/EN 60947-2 1P+N @230 VAC, 2P, 3P, 4P @400 service Ics kA 7.5 7.5 11.2 11.2
VAC
Rated residual breaking capacity I∆m kA 6 6 10 10
Rated impulse withstand voltage (1.2/50) Uimp kV 6
Dielectric test voltage at ind. freq. for 1 min. kV 2.5
Overvoltage category III, disconnector abilities
Thermomagnetic release B: 3 In ≤ Im ≤ 5 In n n n n
characteristic
C: 5 In ≤ Im ≤ 10 In n n n n
K: 10 In ≤ Im ≤ 14 In n
Surge current resistance (wave 8/20) A NA
Mechanical Toggle 2P, 3P, 4P black (MCB) sealable in ON-OFF position + blue (RCD)
features Contact position indication CPI on window
Electrical life 10000
Mechanical life 20000
Protection degree housing IP4X
terminals IP2X
Environmental conditions (damp heat) acc. to IEC/EN 60068-2-30 °C/RH 28 cycles with 55°C/90-96% and 25°C/95-100%
Reference temperature for setting of thermal element °C 30
Ambient temperature (with daily average ≤ +35 °C) °C -25…+55
Storage temperature °C -40…+70
Installation Terminal type top failsafe bidirectional cylinder-lift terminal (shock protected) b
bottom 2P failsafe bidirectional cylinder-lift terminal (shock protected) b
3P/4P In ≤ 40 A cage (shock protected)
3P/4P 50 A ≤ In ≤ 63 A failsafe bidirectional cylinder-lift terminal (shock protected) b
Terminal size top/bottom per cable 2P mm 2 rigid: 35/25 flexible: 25/25
3P/4P In ≤ 40 A mm 2 rigid: 35/25 flexible: 25/16
3P/4P 50 A ≤ In ≤ 63 A mm 2 rigid : 35/25 flexible : 25/25
Tightening torque top/bottom 2P Nm 2.8/2.8
3P/4P In ≤ 40 A Nm 2.8/1.2
3P/4P 50 A ≤ In ≤ 63 A Nm 2.8/2.8
Mounting on DIN rail EN 60715 (35 mm) by means of fast clip device
Mounting position Any
Connection 715 (35 mm) by means of fast clip devicefrom top and bottom