Page 316 - Din prodcuts 2020

2/124 ELECTRICAL INSTALL ATION SOLUTIONS FOR BUILDINGS 2CHC 420 001 C0201

—
2
RCBOs
DS800 technical features

DS800S A DS800N A DS800S A S DS800N A S DS800S A AP-R DS800N A AP-R
Standards IEC/EN 60947-2
Electrical Operating characteristic: type (wave form of the earth leakage sensed) A A A
features Poles 2P, 3P, 4P 2P,4P 2P, 3P, 4P

Rated sensitivity IDn A 0.3 0.3-1(*) 0.03
DS800S Rated current In A 125

Rated voltage Ue V 230/400-240/415-400/690
Insulation voltage Ui V 690
Operating voltage of circuit test Ut V 195-690
Rated frequency Hz 50…60
Rated ultimate short-circuit breaking capacity Icu 240/415 V AC kA 50 36 50 36 50 36
254/440 V AC kA 30 20 30 20 30 20
289/500 V AC kA 10 10 10 10 10 10
400/690 V AC kA 4.5 4.5 4.5 4.5 4.5 4.5
Rated service short-circuit breaking capacity Ics 240/415 V AC kA 40 30 40 30 40 30
254/440 V AC kA 15 10 15 10 15 10
289/500 V AC kA 5 5 5 5 5 5
400/690 V AC kA 3 3 3 3 3 3
Rated impulse withstand voltage (1.2/50) Uimp kV 6
Dielectric test voltage at ind. freq. for 1 min. kV 2.5
Thermomagnetic release B: 3 In ≤ Im ≤ 5 In n n n n n n
characteristic
C: 5 In ≤ Im ≤ 10 In n n n n n n
D**: 10 In ≤ Im ≤ 20 In n n n n n n
K**: 8 In ≤ Im ≤ 14 In n n n
Surge current resistance acc. to VDE 0432 Part 2 (wave 8/20) A NA NA 5000 5000 3000 3000
Mechanical Toggle black (MCB) sealable in ON-OFF position + blue (RCD) operating just from OFF position
features Electrical life 10000
Mechanical life 20000
Protection degree housing IP4X
terminals IP2X
Environmental conditions (damp heat) acc. to IEC/EN 60068-2-30 °C/RH 28 cycles with 55°C/90-96% and 25°C/95-100%
Ambient temperature (with daily average ≤ + 35 °C) °C -25…+60
Storage temperature °C -40…+70
Installation Terminal size for cables flexible mm 6…50
2
rigid mm 6…70
2
Tightening torque Nm min. 3 / max. 4
Mounting on DIN rail EN 60715 (35 mm) by means of rapid fixing device
Dimensions Dimensions (H x D x W) 2P mm 108,2 x 82,3 x 133.5
and weight 3P mm 108,2 x 82,3 x 196

4P mm 108,2 x 82,3 x 223
Weight 2P g 790
3P g 1140
4P g 1440
Combination Combinable with: auxiliary contact yes
with signal contact/auxiliary yes
auxiliary switch
elements
shunt trip yes
undervoltage release yes

* 1A on 2P and 4P versions, while 0.3A only on 4P ones.
** as specified in standard IEC/EN 60947-2 the device withstands Im ≤ 6 In with guaranteed non intervention