Page 11 - DIN Disconnectors

11

—

60 mm Busbar System

XLP00, XLP1, XLP2 , XLP3 and XLPD0

60 mm busbar system
Dimensions of the busbar
XLP00, XLP1, XLP2 and XLP3 5 or 10 mm (thickness) x 10-30 mm (width)
XLPD0_ 5 or 10 mm (thickness) x 12-30 mm (width)

XLP
XLP00 and XLP1 adapters include 3 pieces of XLPD0 Fuse bases have comprehensive shock
distance shoes for 5 mm busbars. The XLP protection including a strip cover. Fuse bases are
adapters are available for cable connection available for neozed (D02) and diozed (DII, DIII)
above (A) or cable connection below (B): fuses. D02 bus-mounting fuse bases are also
suitable for D01 bus-mounting fuse bases thanks
• XLP00, adapters for 60 mm depth to busbars to special holding springs and special ferrule
• XLP1, adapters for 85 mm depth to busbars gauge pieces. From a permanent load of 35A, the
• XLP2 and XLP3 adapters for 120 mm depth 36 mm-wide version is recommended due to the
to busbars heat produced.

XLPD0 XLPD0 bus-mounted fuse holder for cylindrical
XLPD0 devices are fast and easy to install to the fuses 10x38. Fuse holder is UL recognized.
busbar without tools.

XLPD0 Bus-mounted fuse switch can be
padlocked in OFF position (O) and sealed in ON
position (1). The devices have to be equipped with
D0 gauge rings. Together with reducer also
suitable for fuse links D01. The use of 9 mm side
module is recommended for continuous load
more than 35A. Use of D02 fuse links with silver
plated caps is recommended.

— — — —
XLP Bus mounted XLPD0 fuse bases XLPD0 bus-mounted fuse
fuse switch holder for cylindrical fuses