Page 11 - Evolution Distributionboard Technical Catalogue

EVOLUTION DISTRIBUTION BOARDS

DESIGN VERIFICATION CARRIED OUT TO AS/NZS61439.1
(Table D.1)
Tested

No. Characteristic to be verified Sub-clause Test/Doc. Reference Comments

Resistance to corrosion 10.2.2 DEKRA 2217145.102 IPD standard enclosure complies

Thermal Stability 10.2.3.1 DEKRA 2217145.102 IPD standard enclosure complies

Resistance to abnormal heat and fire 10.2.3.2 TUV-50153987 001 IPD standard assembly complies
1 due to internal electric effects CTI-A2200314842101E

Mechanical Impact 10.2.6 DEKRA 2217145.102 IK08 IPD standard enclosure complies

Assembly manufacturer to verify.
Marking (labels) 10.2.7 See comment (Test required for printed labels. Verification
exempted for engraved labels)
Verified by:.............................. Date:...../...../.....
IPD standard enclosure complies.
IP43 - TESTSAFE-32363 Assembly Manufacturer to assess and verify IP
2 Degree of Protection of enclosure 10.3 IP65 - UL - 129169-02/A1 rating if cutouts made on
IP66 - TUV-19401430.001 the door to mount a device/rotary handle etc.
Verified by:.............................. Date:...../...../.....
IPD standard assembly complies.
Assembly manufacturer to verify the final design
3 Clearance 10.4 See comment (Min. distance 5.5mm for 6kV Uimp, 3mm for
4kV Uimp)
Verified by:.............................. Date:...../...../.....
IPD standard assembly complies.
4 Creepage distances 10.4 See comment Assembly manufacturer to verify the final design
(Min. distance 10mm for 630V Ui)
Verified by:.............................. Date:...../...../.....
Effective continuity between the
exposed conductive parts of the 10.5.2 DEKRA 2217145.102 IPD standard assembly complies
assembly and the protective circuit
5
Short Circuit Withstand Strength of 10.5.3 PlusES 104030 IPD standard assembly complies
the protective circuit Icc = 18kA (60% of 30kA)
Incorporation of switching device and Assembly manufacturer to verify
6 components 10.6 See comment Verified by:.............................. Date:...../...../.....

7 Internal electrical circuits and 10.7 See comment Assembly manufacturer to verify
connections Verified by:.............................. Date:...../...../.....

8 Terminals for external conductors 10.8 See comment Assembly manufacturer to verify
Verified by:.............................. Date:...../...../.....
Dielectric properties (Power-frequency
withstand voltage) 10.9.2 PlusES 104030 IPD standard assembly complies
9
Impulse withstand voltage 10.9.3 PlusES 104030 IPD standard assembly complies

Design A – NI21006 Please refer to the tested designs overleaf.
10 Temperature-rise limits 10.10 InA = 250A Assembly manufacturer to verify the final design
RDF (outgoing circuits) = 0.6 Verified by:.............................. Date:...../...../.....
11 Short-circuit withstand strength 10.11 PlusES 104030 IPD standard assembly complies
Icc = 30kA

12 Electromagnetic compatibility (EMC) 10.12 Verified IPD offer complies

13 Mechanical operation 10.13 Verified IPD offer complies

Mechanical strength of fastening 10.101 XXX IPD offer complies
means of enclosure
DBO
Fixing in position of Pole fillers to 10.102 XXX IPD offer complies
comply with IP2XC of 8.2.8
Evolution Distribution Boards-V3
Phone: 1300 556 601 www.ipd.com.au 9