Page 119 - Surge-Protection-E_0.pdf

Surge Arresters – Type 3

DEHNprotector
• Surge protection with monitoring device and disconnector
• Visual operating state (green) and fault indication (red)
• Mains filter (DEHNpro 230 F Protector only)
• Enhanced safety due to fault-proof Y protective circuit

DEHNpro 230: Protection of terminal equipment
DEHNpro 230 F: Protection of terminal equipment with mains filter
The adapter protects the power supply circuits of electronic equipment against
transients and high-frequency interference voltages (DEHNpro 230 F Protector).
For installation in conformity with the lightning protection zone concept at the
boundaries from 1 – 2 and higher.

The adapters with integrated surge protection of the DEHNpro family The integrated disconnector makes a further contribution to device and
protect electronic consumers connected to final circuits from overvoltage. system safety. The standard green and red LEDs indicate the operating
An interference suppressor filter with a balancing and unbalancing effect state of the surge protective devices.
has been integrated in the powerful surge protective circuit of DEHNpro The modern design and use of high quality materials make the DEHNpro
230 F Protectors. This combination of surge protection and filter prevents devices both safe and stylish. This means that the DEHNpro devices fit
a core saturation of the filter in case of high-level transients. The nominal perfectly into their application environment. Starting at the power socket,
current carrying capability of 16 A (DEHNpro 230 Protector) and 10 A they create the right ambience for connecting the latest communication
(DEHNpro 230 F Protector) allows flexible use of these devices in final and media technology. The curved enclosure surfaces and the smooth
circuits. The fault-proof Y circuit ensures protection even if the phase and surface structure of the DEHNpro devices ensure that they lose none of
neutral conductor in standard earthed socket outlets cannot be identified. their original aesthetic appeal even after years of use.

Further adapters with integrated surge protection for protecting the power supply circuit and the data interface of an electronic device can be found on page 216 – 217.

DPRO 230 Protector 909 230 DPRO 230
Adapter with integrated surge protection and child lock.
909 230 4013364117686 04 01 03 03 190 g
69,30 €
Type DPRO ... 230
Part No. 909 230
SPD according to EN 61643-11 / IEC 61643-11 type 3 / class III
Max. continuous operating voltage (a.c.) (UC) 255 V (50 / 60 Hz)
Nominal discharge current (8/20 µs) (In) 3 kA
Total discharge current (8/20 µs) [L+N-PE] (Itotal) 5 kA
Voltage protection level [L-N] / [L/N-PE] (UP) ≤ 1250 / ≤ 1500 V
Max. mains-side overcurrent protection B 16 A
Fault indication red light
Operating state indication green light

DPRO 230 F Protector 909 240 DPRO 230 F
Surge protection for terminal devices with integrated mains filter.
909 240 4013364117693 04 01 03 03 194 g
96,50 €
Type DPRO ... 230 F
Part No. 909 240
SPD according to EN 61643-11 / IEC 61643-11 type 3 / class III
Max. continuous operating voltage (a.c.) (UC) 255 V (50 / 60 Hz) Surge Arresters – Type 3
Nominal discharge current (8/20 µs) (In) 3 kA
Total discharge current (8/20 µs) [L+N-PE] (Itotal) 5 kA
Voltage protection level [L-N] / [L/N-PE] (UP) ≤ 1250 / ≤ 1500 V
Max. mains-side overcurrent protection B 16 A
Fault indication red light
Operating state indication green light

Valid as of August 1, 2020 You will find detailed product information on our website 115