Page 181 - Surge-Protection-E_0.pdf

Pluggable SPDs – DIN Rail Mounted

Accessories for BLITZDUCTOR XT / XTU
DRC MCM XT 910 695 DRC MCM XT
DIN rail mounted device with integrated RFID LifeCheck sensor for condition monitoring of max. 10 BXT / BXTU arresters with RFID LifeCheck.
An RS 485 interface allows the interconnection of up to 15 DRC MCM XT. 910 695 4013364118959 04 03 01 03 180 g
340,00 €
Type DRC MCM XT
Part No. 910 695
Colour grey

DRC SCM XT 910 696 DRC SCM XT
DIN rail mounted device with integrated RFID LifeCheck sensor for condition monitoring of max. 10 BXT / BXTU arresters with RFID LifeCheck. Pluggable SPDs – DIN Rail Mounted
910 696 4013364149359 04 03 01 03 54 g
234,00 €
Type DRC SCM XT
Part No. 910 696
Colour grey

DRC LC M3+ 910 653 DRC LC M3+
Portable device with RFID LifeCheck sensor for flexible use. Fast and easy testing of arresters with RFID LifeCheck. 910 653 kg 4013364113008 04 03 01 02 1.06
966,00 €

Documentation via PC database.
Type DRC LC M3+
Part No. 910 653
Dimensions of storage case 340 x 275 x 83 mm

DRC LC M1+
Portable device with RFID LifeCheck sensor for flexible use. Fast and easy testing of arresters with RFID LifeCheck. 910 655 DRC LC M1+
Type DRC LC M1+
910 655 4013364149250 04 03 01 02 835 g
691,00 €
Part No. 910 655
Dimensions of storage case 275 x 230 x 83 mm

RFID LifeCheck Sensor for DRC BXT
Snap-on RFID LifeCheck sensor and test module for use as spare part / extension for portable RFID LifeCheck test devices.
Type LCS DRC BXT 910 652 LCS DRC BXT
Part No. 910 652
For testing BLITZDUCTOR XT ML 910 652 4013364114531 04 03 01 50 64 g
95,00 €

DIN Rail Mounted Power Supply Unit
High-performance DIN rail mounted power supply unit with single-phase wide-range input can be connected to different supply systems.
The operating state indicator on the front panel indicates whether the output voltage is present. Supply of stationary condition monitoring 910 499 PSU DC24 30W
devices of the DEHNrecord portfolio (DRC SCM XT / DRC MCM XT / DRC IRCM).
910 499 4013364157149 04 03 01 50 180 g
Type PSU DC24 30W
169,00 €
Part No. 910 499
Input voltage range AC 85-264 V; DC 120-373 V
Frequency 44-66 Hz; 0 Hz
Input current (Ie) 0.7 A at AC 110 V / 0.5 A at AC 230 V
Output nominal voltage (Ua) DC 24 V (SELV)
Output current (Ia) 1.3 A at DC 24 V, max. 0.9 A at any installation position
Recommended backup fuse circuit breaker 10 A, 16 A, characteristic B, C
Standards / regulations EN 60950, EN 61204-3, UL 60950, UL 508, GL

USB Interface Converter USB NANO 485
USB NANO 485 converts between USB and RS485 signals and is specifically designed for two-wire RS-485 buses. LEDs indicate the operating 910 486 USB NANO 485
state (yellow), Rx (green) and Tx (red). Due to its compact dimensions, USB NANO 485 is ideally suited for use with notebooks, however,
stationary use is also possible.
910 486 4013364124479 04 03 01 50 130 g
162,00 €
Type USB NANO 485
Part No. 910 486
Version with LED indication

Valid as of August 1, 2020 You will find detailed product information on our website 177