Page 215 - Surge-Protection-E_0.pdf

SPDs for Telecommunication and Data Networks

DEHNpatch
• Patch cable with surge protection
• Cat. 6 according to ISO / IEC 11801
• CAT 6A in the channel according to ANSI / TIA / EIA-568
• Power over Ethernet IEEE 802.3 compliant
(up to PoE++ / 4PPoE)
• IP66 variant for outdoor applications
• Easy to retrofit

DEHNpatch is the first Cat. 6A certified patch cable with surge protection that can
be used according to IEEE 802.3at up to 57 V.

Surge arresters of the DEHNpatch family fulfil various requirements for a length of 3 m. Arresters with other customised cable lengths of up to 10 m
universal application for Ethernet, Industrial Ethernet, Power over Ethernet are available on request.
(IEEE 802.3 compliant up to PoE++ / 4PPoE) as well as general applica- The width of the DIN rail mounted devices is similar to that of an RJ45
tions in structured cablings up to the Gbit range. Due to the different socket, allowing up to 24 devices to be installed next to one another in a
product designs, the SPDs are suitable for indoor and outdoor installation 19“ rack. For multiple application in 19“ distribution boards, a DEHNpatch
in different environmental conditions. mounting set is recommended and is available as an accessory.
The space-saving design of the patch cable or compact socket-socket ver- The IP66 version of DEHNpatch with its universal mounting device, espe-
sions of the DEHNpatch surge arrester makes them particularly easy to cially developed for outdoor applications, can be installed on poles as well
install. So, as well as being easy to equip in new systems, retrofitting is as on walls. The arrester is directly earthed via the metal enclosure. Screws
possible at any time and without any great effort. Due to its fully shielded in the enclosure cover are secured against falling out which facilitatesin-
design, DEHNpatch can be used in shielded and unshielded networks. stallation, particularly when working at heights (e.g. on poles). Special
DEHNpatch is installed between the patch panel and the active compo- cable seals take the effort out of installing the arrester with pre-assembled
nent (e.g. switch). Safe equipotential bonding is provided by the surge patch cables because they eliminate the need to mount RJ45 plugs on the
current resistant DIN rail supporting foot with snap-in mechanism. The lines entering the enclosure.
DEHNpatch with integrated patch cable is delivered with a standard cable

SPDs for Tel. and Data Networks

With RJ45 sockets, fully shielded. IP66 version suitable for outdoor use. Patch cable version, fully shielded. Mounting set (DIN rail, distance bolts)
for 19” mounting sections available
as an accessory.

DPA CLE IP66 929 221 DPA CLE IP66
Universal surge arrester for GBit Ethernet applications, Power over Ethernet (IEEE 802.3 compliant up to PoE++ / 4PPoE) and similar appli-
cations in structured cabling systems up to class E in indoor and outdoor areas in an IP66 rated enclosure impervious to dust and water. 929 221 4013364342866 04 02 06 01 606 g
241,00 €
Protection of all pairs with gas discharge tubes and one adapted filter matrix for each pair. Fully shielded surge protective solution with RJ 45
sockets. Universal mounting bracket for pole and wall mounting.
External accessories: Tensioning straps for pole mounting
Type DPA ... CLE IP66
Part No. 929 221
SPD class T
Max. continuous operating voltage (d.c.) pair-pair (PoE) (Uc) 60 V
Nominal current (IL) 1 A
D1 Lightning impulse current (10/350 µs) per line (Iimp) 0.8 kA
D1 Total lightning impulse current (10/350 µs) total (Iimp) 4 kA
2 1 3 1 2 3
C2 Total nominal discharge current (8/20 µs) total (In) 10 kA 4 5 6 4 5 6
7 8 7 8
Cut-off frequency (fG) 250 MHz
Degree of protection (with installed cables) IP 66
Connection (input / output) RJ45 socket / RJ45 socket
Approvals UL, CSA, EAC 9

Valid as of August 1, 2020 You will find detailed product information on our website 211