Page 340 - V16 Catalogue Final

METERING ACCESSORIES

METERING TEST BLOCK
Features:
- Multi-point sealing. Description Part No.
- Captive sealing screws. Metering Test Block KWHTB01
- Terminals align with standard cable holes. (supplied with loose Link)
- IP20 enclosure with cover fitted. Metering Test Block KWHTB02
- Dimensions 148mm x 207mm x 58mm (H x W x D) (Victorian specification)
screw projection 13mm. Three Single Phase Meter Installation with A Phase Meter only shown for clarity

A Phase
1 Phase
Meter
3 Phase
Meter

KWHTB01
Metering Test Block

Secondary Conductors
Current Circuit Wiring- 4mm 2
Voltage Circuit Fuses - 10A HRC Voltage Circuit Wiring
2.5mm 2
Voltage Circuit
Wiring - 4mm 2
NL if required
Polarity Marks on
Primary
Supply Supply Side of CTs Load Conductors

3 PHASE kWh METER TEST TERMINALS 0.25mm² - 6mm²
STANDARD ‘GREY’ COLOUR SCREW CLAMP

Description Part No.
Conductor cross section stranded. 0.2 - 6.0mm² CDS6U-KIT3P
Dimensions (L x W x H), 82 x 81.5 x 60mm
Marking tag: K8 size
3 CT Kit
- Kit does not include end stops (CA202) or the mounting rail.

CDS6U-KIT3P

CURRENT TRANSFORMERS (CT) TEST LINKS

Description Part No.
Connection: To suit 1 CT CT TEST LINK
Conductor cross section stranded, 1.5 - 10mm 2
Dimensions (L x W x H), 63 x 19 x 58.7mm
Colour “grey”, 160V/10A
CT TEST LINK Kit includes 1x CDTTUSH terminal and 1x EPCDTTU endplate.

Connection: To suit 3 CT CT TEST LINK-3
Conductor cross section stranded, 1.5 - 6.0mm 2
Dimensions (L x W x H), 63 x 51 x 58.7mm
Colour “grey”, 160V/10A
Kit includes 3x CDTTUSH terminals and 1x EPCDTTU endplate.
CT TEST LINK-3

332 V16-PM-R04 www.ipd.com.au Phone: 1300 556 601