Page 424 - V16 Catalogue Final

MONITORING RELAYS & OPTICAL SIGNALLING - DIN MOUNTING

THERMISTOR RELAY
Universal
Function Contacts Supply voltage Part No.
Monitoring of Motor Winding Temperature
Monitors temperature in range of PTC thermistor. 2 x C/O, 24-240V AC/ TER-7
Thermostat operation for fault detection. 8 Amps DC
Memory function.
Manual and remote reset facility.
- 1 module width 17.5mm.

TER-7
LIQUID LEVEL CONTROL RELAY
Timing Universal
Function delay Contacts Supply voltage Part No.
Liquid Level Monitoring
Selection of: 0.5-10sec 1 x C/O 24-240V AC/ HRH-5
- Pump up (filling) 8 Amps DC
- Pump down (emptying)
Control with One probe - fill monitoring
Control with Two probes - fill and empty monitoring.
Adjustable sensitivity of 5-100kΩ
- 1 module width 17.5mm.
HRH-5

LIQUID LEVEL CONTROL PROBE

Description Part No.
Stainless Steel One-Pole Electrode, SHR-2
SHR-2 intended for tank wall mounting.
Use in electric conductive fluids and mechanically polluted fluids with
temperature +1…+80 degree C
IP67 Stainless Steel Probe Designed SHR-3
for screwing or soldering into tank wall or cover.
Use in demanding industrial environments with max. operating
temperature of 95 degree C.
SHR-3

OPTICAL SIGNALLING

LED not LED illuminated Supply
Function illuminated Yellow Green Red voltage Part No.
Optical Signalling of Three-Phase Mains
Optical signalling of voltage level 0....50V / 50...207V / 207...264.5V 264.5...276 / 3 x 400 / MPS-1
inthree phases. 45...0V 195.5...45V /253...195.5V 276...253V 230V AC
Each phase features LED signalling
divided by colour into voltage levels:
- voltage in tolerance ±15% - green
- overvoltage - red
- undervoltage - yellow
- voltage <50V - LED not
illuminated Indication:
- 1 module width 17.5mm.
MPS-1

Datasheets & Function Diagrams available at ipd.com.au

416 V16-IC-T&EC-R04 www.ipd.com.au Phone: 1300 556 601