Page 6 - MCCB-XT5
P. 6

ABB | SACE Tmax XT
        Introduction




       1 - Contents



                          Overview This manual describes the characteristics of the Ekip Touch Trip units installed on SACE Tmax XT5 CB,
                                    among which:
                                      1.   general overview:
                                      2.  management operations: putting into service, maintenance, troubleshooting
                                      3.  operating conditions
                                      4.  consultation of menus for changing parameters and displaying measurements
                                      5.  accessories



                          Firmware This manual is updated to firmware version 3.12


                         recipients This manual refers to two user profiles, as defined by standard IEC 60050:
                                     •  skilled person, in the electrical field (IEV 195-04-01): person with relevant education, training,
                                       knowledge and experience to enable him or her to perceive risks and to avoid danger which
                                       electricity can create
                                     •  instructed person, in the electrical field (IEV 195-04-02): person adequately advised or supervised
                                       by electrically skilled persons to enjable him or her to perceive risks and to avoid danger which
                                       electricity can create
                                           IMPORTANT: operations which can be performed by persons trained on the subject of
                                           electricity are specifically indicated in this manual. All the remaining operations described
                                           in this manual must be performed by skilled persons, in the field of electricity. ABB
                                           declines all liability for damage to persons or property caused by failure to comply with
                                           the instructions in this document.



       Specifications and supporting  To ensure that Ekip Touch is installed and configured correctly, please read the information in this manual
                        documents and in the technical documentation of the product, available in the website ABB liBrAry
                                     Document           Code                Description
                                     Technical catalogue  1SDC210100D0201   CB SACE Tmax XT general catalogue
                                     Wiring diagrams    1SDM000005A1001     CB SACE Tmax XT5 Wiring diagrams
                                                        1SDH002011A1001
                                     Installation instructions              CB SACE Tmax XT5 Installation instructions
                                                        1SDH002011A1002
                                                                            Communication System Interface SACE Tmax XT
                                     System Interface   1SDH002031A1002
                                                                            CBs



                       Design notes The information in this manual was written in Italian and then translated into other languages to conform
                                    to the laws and/or commercial requirements concerning the product.
























       4 | © 2022 ABB |  1SDH002039A1002 - ECN000212994                                        Introduction | 1 - Contents
   1   2   3   4   5   6   7   8   9   10   11