Page 8 - MCCB-XT5
P. 8

ABB | SACE Tmax XT
        Trip unit Overview




       1 - General characteristics



                           Families SACE Tmax XT5 can be configured to operate with two Trip unit families:
                                     •  Ekip Dip with interface via DIP switches
                                     •  Ekip Touch with touchscreen display
                                    Both families provide protection and measuring functions related to signals from the installation and are
                                    available in different models and versions.
                                    There are six Ekip Touch models available:
                                     •  Ekip Touch
                                     •  Ekip Touch Measuring
                                     •  Ekip Hi-Touch
                                     •  Ekip G Touch
                                     •  Ekip M Touch
                                     •  Ekip G-Hi Touch
                                    As mentioned previously, a description of Ekip Touch is given in this manual;consult the  Installation
                                    Instructions for a description of Ekip Dip; references are given on page 4



                     Main functions The Ekip Touch Trip unit provides the following functions:
                                      1.   Measurement: measurement of different quantities, such as: current, voltage, power, energy
                                      2.  Protection: depending on the measurements made and the parameters configured by the user, the
                                         Trip unit checks for the presence of alarms and commands circuit-breaker opening if necessary
                                      3.  Signalling: management of contacts and communication networks to optimize plant efficiency,
                                         communication among different CB and other functions
                                    The functions are provided both by transducers and actuators inside the circuit-breaker, and by means of
                                    a vast range of external accessories.


                       Presentation

















                                    Figure 2
                                    Ekip Touch has a touchscreen display (1) for accessing the configuration menus and checking parameters,
                                    measurements and information (page 24).
                                    The nominal size of the Rating plug (2) can be checked on the front (page 127) and access the battery
                                    compartment (4).
                                    Connections to the internal and external electronic accessories are in the internal terminal box (3) (page
                                    13 for an overview of the electronic accessories, refer to the Technical catalog and Circuit diagrams for all
                                    the other accessories).
                                    The external connectors for zone selectivity are on the back (5) (page 73) and, with 3P CB, for the External
                                    neutral sensor (page 206) and for the external neutral voltage V0.











       6 | © 2022 ABB |  1SDH002039A1002 - ECN000212994                          Trip unit Overview | 1 - General characteristics
   3   4   5   6   7   8   9   10   11   12   13