Page 5 - E630 Brochure

E630
Locks - Technical Data

HANDLES AND THREE POINT LOCKING
Description Height Part No.
COMPONENTS
Padlockable L Handle E-LHANDLE
Padlockable Swing Handle E-SWHANDLE
Three point locking rods 600mm E-TPL06
800mm E-TPL08
1000mm E-TPL10
1200mm E-TPL12
E-SWHANDLE
KITS
Padlockable L Handle 600mm E65-LTPL06
including three point 800mm E65-LTPL08
locking rods 1000mm E65-LTPL10
1200mm E65-LTPL12
Padlockable Swing Handle 600mm E65-SWTPL06
including three point 800mm E65-SWTPL08
E-TPL10 locking rods 1000mm E65-SWTPL10
1200mm E65-SWTPL12

OTHER LOCK OPTIONS
Coin Locks Unspecified Keylockable KELS12140
NSW - PWD E RL-ELOCK-CL
WA - 42886 RL-42886-CL
L Handle VIC - CL001 200-9437-CL001
T Handle Locking Not Required THLC12130
Unspecified Keylockable THLC12131
200-9437-CL001
QLD - 92268 T-HANDLE-92268
E66-LTPL08 VIC - CL001 T-HANDLE-CL001
Swing Handle NSW - PWD E RL-ELOCK
Other Knob Lock ELS12120
Plastic Bung ELS05817
Replacement IEC style ELS05775
Door Padlocking E-PADLOCKCOVER
E-PADLOCKCOVER

TECHNICAL DATA:

Rated Voltage (V) 415V
Rated Current (A) 160A 250A 400A 630A
Fault Current (ICC) 50kA
Duration Conditional* (TCA No. 103550)
Rated Frequency (Hz) 50Hz
Insulation level 2.5kV
Segregation (AS/NZ3439.1) 3bih
Applicable Standard AS/NZ3439.1
IP Rating IP43
Enclosure Material 1.6mm Mild Steel (MS)
Paint Powder coated Ripple finish Grey RAL7035 or Orange RAL2000
Door Locks Metal IEC locks
Hinges Concealed
Escutcheons 1.5mm MS Powder Coated White. Generally hinged. Tool access.
Top Gland Plates 1.5mm MS Powder Coated Grey/Orange
Side Blank Plates 1.5mm MS Powder Coated Grey/Orange
Bottom Gland Plates 1.5mm MS Powder Coated White
Mounting Pans 2mm Zincalume
Incomer Module Sealable Escutcheon with Padlock hasp to lock Toggle On or Off
CT Module Sealable door with schedule card holder
3mm Clear poly front barrier
2mm Clear poly barrier with glands for Cu busbar/cables
250A - 6.35 x 25mm round edge HDHC Copper alloy 110 to AS1567
400/630A - 30 x 10mm square edge HDHC Copper alloy 110 to AS1567
Metering Module 6mm Insulated mounting pan
1.5mm Shield plate MS Powder Coated White 3mm optional
Plinth 3mm MS Galvanized
Lifting Method using 30mm Dia. Lifting holes provided in plinth

* Tested with the Main Incoming breaker. FEN or FGN. (As either of these MCCB’s is always installed as Incomer.)

IPD GROUP LIMITED Phone: 1300 556 601 www.ipdgroup.com.au