Page 858 - Din prodcuts 2020

9/28 ELECTRICAL INSTALL ATION SOLUTIONS FOR BUILDINGS 2CHC 420 001 C0201

—
SMISSLINE TP plug-in system
RCBOs FS403 series 10 000 - 6000 A y type and
short time delay Type F

FS403
Rated voltage Un 240/415V
Number of poles 4
Rated frequency fn 50/60 Hz
Rated breaking capacity Icn 10 kA (10 A to 16 A)
6 kA (20 A to 32 A)
Current limitation class 3
Total cut-off time acc. to EN 61009
at In 40 ms
FS 403 M
at 5x In 25 ms
Connection cross-section max. 25 mm flexible wire with wire end sleeve
2
Terminal at load side Possible to connect 2 wires in one chamber.
Both chambers could be used with two different
cross-sections.
Tightening torque 2.8 Nm
Degree of protection IP20
Endurance >5000
9
Resistance to climate EN 61009
Ambient temperature –25° C … +40° C
Mounting position any
Vibration resistance EN 61009
Plastic parts halogen-free
Contacts cadmium-free
Standard EN61009-1, SEV, VDE
Accessory:
Auxiliary- and signal contacts are to attach on to the left of the device through the customer.
Please notice:
For the influence of the ambient temperature and the thermal influences of row mounted RCBO’s it is necessary to calculate
with the same correction factors like with MCBs.
Please see in Chapter 2 of Electrical installation solutions for buildings - Technical details.

4-pole RCBO from the ABB SMISSLINE protective devices range
The combination of circuit protection and a residual current protection in one device as 4-pole
RCBO simplifies both – planning and installation. It enables you to provide perfect protection
in one device. This protection consists of:
• Short circuit protection
• Overload protection
• Residual current protection
• Preventive fire protection

High rated short-circuit breaking capacity of 10 kA, conforming to EN 61009-1
The I 10 kA short-circuit breaking capacity of the RCBO complies with standard EN 61009-1.
cn
This standard specifies testing and usage of RCBO’s for household and similar uses.
The devices can also be used by non-professionals.
Features and benefits of the new devices:
• Overall width of 72 mm (4 modules)
• Rated sensitivity 30 mA
• Current rating 10 A to 32 A
• B and C tripping characteristics
• Easy Drive double deck terminals on the output side for connecting two conductors in one cham-
ber. The two chambers can accommodate conductors with different cross sections.