Page 10 - MOD
P. 10

10               MOD & AR EMPOWER YOUR SYSTEMS, WITH REMOTE CONTROL AND AUTOMATION




          —

          InSite web server integration














         Open and close command
         allows the end user to perform actions on
         the MOD or AR, and thus on the main
         protection device and the downstream
         installation circuits.
         → It helps to save costs and time in case of
         maintenance operations and the need to
         shut down/reactivate the affected lines.  Tripping and operations event counter (times, D/H)
                                                  is the number of operations (1,2,3….) handled and
                                                  monitored by the MOD or AR.

                                                  → Checking the event logs with its collection of event
                                                  and alarm history, helps to track the installation status.





                                                                      Optimum interface
                                                                      Customizable dashboard in the InSite web server
                                                                      with user-friendly widgets and alarm setup.






                                                                         Firmware upgrade
                                                                         Remotely upgrade the firmware of MOD/AR
                    InSite                                               through the InSite SCU200 web server.


               web server




                                                                      Settings
                                                                      for autoreclosing units, a number of parameter
                                                                      values can be managed and adjusted by the user.

                                                                      → System customization can provide easy and
                                                                      flexible management.






                                                 Connection status
                                                 states if the MOD or AR are is correctly connected to InSite.
         Main protection device monitoring
         Shows the status of the protection      → If the device is not connected, it will not be visible on the
         device upstream MOD or AR.              web server. Network status needs to be checked and
                                                 connection operations may need to be performed again.
         → If the protection device is switched off
         and the downstream equipment is no
         longer running, the user is informed and
         can decide what action to take.
   5   6   7   8   9   10   11   12   13   14   15