Page 126 - SACE Tmax XT - Catalogue

4/30 SACE TMAX XT LOW VOLTAGE MOLDED CASE CIRCUIT-BREAKERS

—

Accessories for XT2-XT4 Ekip trip units

HMI030 interface on the front of the switchboard
The HMI030 is an interface on the front of the switchboard which is only usable with protection trip
units fitted with the Ekip Com.
Main features:
• Installation: The HMI030 can be fitted into the hole in the door using an automatic click-in method. In
situations where mechanical stress is particularly intense, it can also be installed by using the special
— clips supplied. It must be connected directly to the Ekip LSI and Ekip LSIG protection trip units with
HMI030 interface on the
front of the switchboard Ekip Com via the serial communication line. The HMI030 requires a 24V DC power supply.
• Functions: The HMI030 consists of a graphic display and four buttons for browsing through the
menus. This accessory allows you to view:
- the measurements taken by the trip unit to which it is connected;
- the alarms/events of the trip unit.
Thanks to its high level of accuracy, the device is a valid substitute for conventional instruments with-
out any additional current transformer.
• Communication: The HMI030 is provided with two communication lines, to be used alternatively with:
- Modbus
- Local Bus
Connecting the Ekip LSI and Ekip LSIG to the Local Bus allows the Modbus line of the Ekip Com mod-
ule to connect to a different communication network.