Page 122 - SACE Tmax XT - Catalogue

4/26 SACE TMAX XT LOW VOLTAGE MOLDED CASE CIRCUIT-BREAKERS

—

Accessories for Ekip Touch trip units

Display and supervision

Ekip Multimeter Display for the front of the switchgear
The Ekip Multimeter is a display unit which can be installed on the front of the switchgear for the Tmax XT circuit-
breakers equipped with Ekip Touch trip units. The device is equipped with a large touch screen display and enables
measurements to be displayed. If connected to trip units with a display, the Ekip Multimeter enables the adjustment
of parameters and protection thresholds. Up to 4 Ekip Multimeter devices can be connected at the same time to the
same Ekip protection trip unit to display currents, voltage, power and energy. The Ekip Multimeter can be
connected to a single trip unit and can be powered either by direct current (24-48V DC or 110-240V DC) or
alternating current (110-240V AC). It is equipped with a 24V DC output that supplies the trip unit to which it is
—
An Ekip Multimeter connected (only if Ekip Supply is not used). Moreover, in case of XT2-XT4 sizes only, this device can be
Display for the front used also with the Dip version of Ekip LSI and Ekip LSIG trip units.
of the switchgear.
Power supply 24-48V DC, 110-240V AC/DC
Tolerance 21.5-53V DC, 105-265V AC/DC
Rated Power 10VA/W
Inrush current 2A for 20ms

Lite Panel
The Lite Panel is a 7 inches local control panel that can monitor and control max 15 devices connected via Mod-
bus TCP/IP or Modbus RTU. Available with Ekip Touch/Hi-Touch trip units.
The most important functionalities of this device:
• User administration: 5 level of user inside the Lite Panel
• Automatic scan via Modbus RTU and via Modbus TCP connection of various devices already mapped
—
Lite panel inside the Lite Panel: Emax 2, Tmax XT, ITS2, M4M, CMS700 etc...(see detailed list in the user installa-
tion manual)
• Local monitoring directly on the front of the panel for all devices
• Local control of devices: open, closing, reset
Alarm list and event log directly displayed from one access point.