Page 242 - Surge-Protection-E_0.pdf

Measuring and Test Devices

DRC MCM XT
910 695 DRC MCM XT
DIN rail mounted device with integrated RFID LifeCheck sensor for condition monitoring of max. 10 BLITZDUCTOR XT / XTU arresters with
910 695 4013364118959 04 03 01 03 180 g
340,00 € RFID LifeCheck technology. Visual operating state indication via three-coloured LED in conjunction with remote signalling contact (break or
make contact). Up to 15 DRC MCM XT can be monitored via the integrated RS485 interface in a system with up to 150 BLITZDUCTOR XT / XTU
arresters. The free "Status Display and Service Console" software can be optionally used via an RS485 interface converter. The software allows
PC-based remote indication of the condition of all monitored arresters.
Download: www.dehn-international.com (Service section)
Type DRC ... MCM XT
Part No. 910 695
Input voltage range (d.c.) (UIN) 18-48 V
Max. rated current consumption (IIN) 100 mA
14 CM A RS485 RFID transmission frequency 125 kHz
22 B
Type of remote signalling contact make (no) and break contact (nc)
13 +/- dc power
supply
21 -/+ dc
Delivery includes base part, monitoring module, quick guide and labelling system
DRC SCM XT
910 696 DRC SCM XT
DIN rail mounted device with integrated RFID LifeCheck sensor for condition monitoring of up to ten BLITZDUCTOR XT /XTU arresters with
910 696 4013364149359 04 03 01 03 54 g
234,00 € RFID LifeCheck technology. Visual operating state indication via three-colour LED combined with remote signalling function (break contact).
Type DRC ... SCM XT
Part No. 910 696
Input voltage range (d.c.) (UIN) 18-48 V
Max. rated current consumption (IIN) 100 mA
RFID transmission frequency 125 kHz
CM
22 Type of remote signalling contact break contact (nc)
+/- dc power
-/+ dc supply Delivery includes base part, monitoring module, quick guide and labelling system
21

Accessories for Condition Monitoring System RFID LifeCheck

DIN Rail mounted Power Supply Unit
910 499 PSU DC24 30W
High-performance DIN rail mounted power supply unit with single-phase wide-range input can be connected to different supply systems.
910 499 4013364157149 04 03 01 50 180 g
169,00 € The operating state indicator on the front panel indicates whether the output voltage is present. Supply of stationary condition monitoring
devices of the DEHNrecord portfolio (DRC SCM XT / DRC MCM XT / DRC IRCM).
Type PSU DC24 30W
Part No. 910 499
Input voltage range AC 85-264 V; DC 120-373 V
Frequency 44-66 Hz; 0 Hz
Input current (Ie) 0.7 A at AC 110 V / 0.5 A at AC 230 V
Output nominal voltage (Ua) DC 24 V (SELV)
Output current (Ia) 1.3 A at DC 24 V, max. 0.9 A at any installation position
Recommended backup fuse circuit breaker 10 A, 16 A, characteristic B, C
Standards / regulations EN 60950, EN 61204-3, UL 60950, UL 508, GL

USB Interface Converter of Type USB NANO 485
910 486 USB NANO 485
USB Nano 485 converts between USB and RS485 signals and is specifically designed for two-wire RS-485 buses. LEDs indicate the operating
910 486 4013364124479 04 03 01 50 130 g
162,00 € state (yellow), Rx (green) and Tx (red). Due to its compact dimensions, USB Nano 485 is ideally suited for use with notebooks, however,
stationary use is also possible.
Type USB NANO 485
Part No. 910 486
Version with LED indication

Labelling System BA1-BA15
920 398 BS BA1 BA15 BXT
2x 165 adhesive labels for labelling DRC MCM XT monitoring devices with the bus address.
920 398 4013364126572 04 02 01 50 5.60
g/Sa 12,70 €
Type BS BA1 BA15 BXT
Part No. 920 398
Colour transparent
Partition
910 697 TW DRC MCM EX
Allows BXT devices for non-intrinsically safe circuits to be positioned directly next to intrinsically safe circuits (thread measure ≥ 50 mm).
910 697 4013364123717 04 03 01 50 31.00
g/Sa 27,50 € For DRC MCM XT and DRC SCM XT; 1 set = 2 pieces.
Type TW DRC MCM EX
Part No. 910 697
Colour blue
For mounting on
35 mm DIN rails acc. to EN 60715
Measuring and Mess- und Test Devices Prüfgeräte 238 You will find detailed product information on our website Valid as of August 1, 2020