Page 246 - Surge-Protection-E_0.pdf

Measuring and Test Devices

SPD Test Device
• For routine tests of surge protective devices
• Compact dimensions
• Suitable for mains and battery operation
• Low battery indicator
• Test leads included in delivery
• Touch-protected test adapter for modular arresters
of the XT / XTU / SP series available as an accessory

For testing the sparkover voltage of surge arresters. The specimen is connected via
the supplied test leads or special test adapters.

The PM 20 SPD test device with integrated sparkover detection is used to tested. The results can be compared to the limit values specified in the
test Yellow/Line and Red/Line surge arresters with integrated varistor, instructions for use. In case of deviations, the arrester or protection mod-
Zener diode or gas discharge tube. Both the sparkover performance be- ule must be replaced. A test adapter with a corresponding support makes
tween the connections of the arresters as well as the continuity can be it easier to test arresters of the BLITZDUCTOR XT / XTU / SP product family.

Indication of the measured spark- The sparkover performance of gas Insulated test leads are included in Test adapter for modular arresters.
over voltage. discharge tubes, varistors and Zener delivery.
diodes can be tested.

PM 20
910 511 PM 20
Combined device for testing the sparkover voltage of surge arresters (with gas discharge tubes / varistors / Zener diodes).
910 511 4013364111424 04 03 01 01 1.32
kg 1.785,00 € Storage bag and measuring accessories included.
Type PM 20
Part No. 910 511
Nominal voltage (d.c.) (UN) 8-12 V d.c.
Test parameter: Test voltage max. 1250 V d.c.
Measured value indication alphanumeric, eight-digit LCD
2 test leads (each 1 m long), 2 safety tapping test clips,
Accessories included in delivery
1 plug-in power supply unit (230 V a.c.), 1 storage bag
Dimensions of the storage bag 300 x 110 x 110 mm

Accessories for SPD Test Device

PA BXT Test Adapter
To be connected to PM 10 / PM 20. For inserting and testing protection modules.
910 508 PA BXT
Type PA BXT
Part No. 910 508
For protection modules BLITZDUCTOR XT / SP / CT
910 508 4013364111363 04 03 01 03 800 g
953,00 €

Measuring and Mess- und Test Devices Prüfgeräte 242 You will find detailed product information on our website Valid as of August 1, 2020