Page 32 - MCCB-XT5

ABB | SACE Tmax XT

Measurements

Figure 18

If provided for by Trip unit model, the Measurements pages contain a list of measurements acquired in
real time, expressed in absolute value:
Page Name Measurements
1 Current Currents: phase, earth fault
2 Voltage Voltages: line-to-line, phase, neutral
3 Active power Phase and total active powers
4 Reactive power Phase and total reactive powers
5 Apparent power Phase and total apparent powers
6 Energy counters Total active, reactive and apparent energies
Summary of Ekip Signalling 3T module measurements, if
9 Ekip Signalling 3T
installed

Ekip Touch configuration involves certain exceptions:
• the Ne current measurements are available with 4P and 3P + N configurations
• the phase voltage measurements are available with the 4P and 3P + active external neutral voltage
configuration
• with the 3P configuration, pages: Active Power, Reactive Power and Apparent Power are replaced
by the Powers page with the total active, reactive and apparent power measurements
Press the sides of the display to browse the pages; press the HOME key to quit.
NOTE: each page can be set as the main page by pressing HOME, holding it for five seconds
and confirming the message on the display

30 | © 2022 ABB | 1SDH002039A1002 - ECN000212994 Ekip Touch - Interface and menus | 3 - Graphic pages