Page 50 - dehn-catalogue-safety-equipment_0

DEHNcap/P Voltage Indicator DEHNcap/A Voltage Indicator DEHNcap/IT Interface Test Unit DEHNcap/PC Phase Comparator DEHNcap HR LRM Test Set DEHNcap Test Adapter
3. Verify that the Installation is dead – DEHNcap Voltage Detecting System

DEHNcap/P Voltage Indicator
Nominal voltages up to 45 kV / 50 Hz
Easy verification of isolation from supply voltage
• Cost-effective

Test for correct operation
EN 50110-1 (DIN VDE 0105-100) requires that voltage indicators be test-
ed for correct operation shortly before and after use.
Passive indicators without self-testing element must be tested for correct
operation by plugging them into test sockets connected to operating volt-
age or into a test unit (DEHNcap/P test unit).

DEHNcap/P passive voltage indicator used in an encapsulated switchgear instal- General Information:
lation.
Standard EN/IEC 61243-5 (DIN VDE 0682-415)
Temperature range –25 °C ... +55 °C
Degree of protection IP 66
Type of device Voltage indicator
Can also be used as permanent voltage
Use
indicator

DEHNcap/P-HR
767 101 SAG DCA P HR GA
Type SAG DCA P ... HR GA
767 101 4013364069541 05 00 03 12 60 g
53,00 €
Part No. 767 101
Dimensions 40 x 48 x 35 mm
Plug spacing 19 mm
Indication threshold (HR system) 90 V
Input impedance (HR system) 36 MOhms

DEHNcap/P-LRM
767 102 SAG DCA P LRM GA
Type SAG DCA P ... LRM GA
767 102 4013364074064 05 00 03 12 62 g
72,00 €
3. DEHNcap Voltage Detecting System Plug spacing 14 mm
767 102
Part No.
40 x 48 x 35 mm
Dimensions
Indication threshold (LRM system)
5 V
Input impedance (LRM system)
2 MOhms

Accessories for DEHNcap/P Voltage Indicator

Test unit for DEHNcap/P
767 110 TG DCA
767 110 4013364070905 05 00 03 12 119 g
119,00 €
Type TG DCA
Part No. 767 110
Nominal voltage (UN) 230 V
Frequency 50 Hz
Nominal capacity 500 mW
Max. short-circuit current at the test socket Approx. 20 µA
Dimensions 43 x 75 x 35 mm

48 You will find detailed product information on our website Valid as of January 1, 2019