Page 17 - Assembly Instructions Manual
P. 17
Larger panels are often made in separate
sections for ease of transportation. Always
make the main busbar joint at the rear of a
cable section. When the panels are pushed
together the busbars should almost touch
each other. With the clamping bracket shown
here you can join the busbars from the front
of the panel.
Please note the copper plate positioned
between the bars. Tighten with a torque of
100Nm.
Other types of joints are available. Please
refer to the Constructors Manual page 2:09
ISSUED BY: F. P DATE: 01.10.2007 APPROVED BY: A. K DATE: 01.10.2007 REPLACES: 01.04.2005 11
