Page 3 - Assembly Instructions Manual

- Take one Plinth Corner and assemble it to the
Plinth Profile used for the depth. - 2 sets of completed depth Base
- Fix one more Plinth Corner to the other end Profiles.
- Make sure that the blanking plugs of the Plinth
Corners, which are used to lift the panel, are posi-
tioned at the front and back.

- Completed plinth assembly.
- Connect the two depth Base Profiles with the Side
Profiles and tighten to the torque specified.
- It is easy to assemble a complete plinth by following
the assembly sequence.

- If the plinth needs to be rein-
forced, use the Strengthening
Bracket with depth Base
Profile.
- The Strengthening Bracket
profile fixing position can be
changed according to the
panel design

- Completed plinth assembly with two
sets of strengthening profiles

ISSUED BY: F. P DATE: 01.10.2007 APPROVED BY: A. K DATE: 01.10.2007 REPLACES: 01.04.2005 01