Page 620 - IPD Product Catalog V17

Motor Protection

UNIVERSAL MOTOR

CONTROLLER

Intelligent motor management system for single and three-phase motors. Compact housing with integrated current transformer (0.24 - 63A) for cable cross
sections up to 25mm² (max. Ø with insulation 11mm). Higher currents with additional external current transformer. Thermal overload protection according to
EN/IEC 60947-4-1, selectable trip classes 5E, 10E, 20E, 30E, 40E. Some functions require an additional expansion module.

Motor Protection Functions:

- Over/underload, over/undercurrent, over/undervoltage, rotor blocking, phase failure/imbalance/
sequence
- Earth fault detection integrated or with external sensor CEM11-FBP.0
- Hot motor protection with thermistor or temperature measurement

Motor Control Functions:

- Easily configurable motor control functions: direct, reverse, star-delta starter, pole changing,
overload relay, actuator mode, softstarter mode
- Additionally, free programmable application specific logic with function blocks

Service and Diagnostic Data:

- Operating hours, number of motor starts and overload trips, energy, standstill and operation hours supervision, motor status, faults
and warnings, fault history (16 events)
- Motor current, phase voltages, thermal load, power factor (cos φ), active power, apparent power, energy, total harmonic distortion (THD)

Integrated I/Os:

- Six digital inputs, one PTC input, four digital outputs
- Maximum number of I/Os with expansion modules: 14 digital inputs, one PTC input, nine digital outputs, six analogue inputs, one analogue output

620 1300 556 601 | ipd.com.au | V17-R05