Page 7 - 12_DS164_E_0413_Blitzductor_XTU

INFORMATION TECHNOLOGY SYSTEMS BLITZDUCTOR XT
®
PLUGGABLE SPDS FOR DIN RAIL MOUNTING Accessories

LifeCheck Condition Monitoring System Accessory for BLITZDUCTOR ® XT Base Part
®
0.022
1
Stk. Anfrage
920 308
109209
421
Earthing module
DRC MCM XT
For direct earthing of lines connected to the BLITZDUCTOR XT
DIN rail mounted device with integrated LifeCheck sensor for
monitoring the condition of max. 10 LifeCheck-equipped base part.
"BLITZDUCTOR XT" devices. Visual three-coloured SPD operat- PU Part
ing state indication combined with remote signalling function Type pc(s). No.
(break or make contact). The free "Status Display and Service BXT M4 E 1 920 308
Console" software can be optionally used via an RS 485 inter-
face converter.
PU Part Test / Disconnection Module
Stk. Anfrage
421
1
920 309
109193
0.016
Type pc(s). No. Module for testing lines, to be plugged into the BLITZDUCTOR
DRC MCM XT 1 910 695 XT base part.
Accessory for LifeCheck ® Condition Monitoring System Type BXT M4 T
Accessories 2 measuring lines (1 m), protective bag
PU Part
USB interface converter of type USB NANO 485 Type pc(s). No.
USB NANO 485 converts signals between USB and RS-485. The BXT M4 T 1 920 309
interface converter is specifically designed for 2-wire RS-485
buses. LEDs indicate operation (yellow), Rx (green) and Tx (red).
USB NANO 485 is ideally suited for use with notebooks due to its Marking System BA1-BA15
small size. Stationary use is also possible. 2 x 165 adhesive labels for labelling DRC MCM XT monitoring
PU Part devices with their bus address (BA1 to BA15) and BXT base
Type pc(s). No. parts or modules with consecutive numbers (1.1-1.10 to
USB NANO 485 1 910 486 15.1-15.10)
PU Part
Type pc(s). No.
BS BA1 BA15 BXT 1 920 398
LifeCheck SPD Test Device
®
1
920 395
SA Anfrage
118157
0.006
428
DRC LC M3+ EMC Spring Terminals
Two spring terminals for permanent low-impedance shield con-
Portable device with LifeCheck sensor for flexible use. For fast
and easy testing of LifeCheck-equipped arresters. Visual and tact with the protected and unprotected side of a BXT device.
acoustic indication. With additional USB connection and data- With integrated terminal coding for direct or indirect shield
base software for PC-aided management of test objects and earthing, cable ties and insulating strips included.
documentation of the test results. DRC LC M3+ features a new Type SAK BXT LR
snap-on LifeCheck sensor, allowing to test the SPD without hol- Accessories Cable tie, insulating strips
ding the sensor. The handheld device allows parameterisation Clamping range 3 - 10 mm
of SPDs for condition monitoring.
PU Part
Type pc(s). No.
Type DRC LC M3+
SAK BXT LR 1 920 395
Testing of BLITZDUCTOR XT ML
E

R
C
T
O
T

M

X
L
U
I
D
T
Z
L
B BLITZDUCTOR XT ML EX X
l
o
n
o
e
h
r
e

s
p
s
m
n
i

o
n

e
r
o
f for use in non-hazardous atmospheres only! y !
s
u

n
t
a
r
d
s

o
u
h
a
-
a
z
Measured value indication beep and LCD
Testing period typically 3 to 10 sec. Partition
Delivery includes handheld device, LifeCheck sensor BXT, charging device, For DRC MCM XT
USB cable, test module for reference, software CD, storage case Certain installation instructions have to be observed when
PU Part using Blitzductor XT Ex (i) surge protective devices in intrinsical-
Type pc(s). No. ly safe circuits.
DRC LC M3+ 1 910 653
In accordance with EN 60079-11;2007 a minimum distance
(thread measure) of ≥ 50 mm has to be maintained between
intrinsically and non-intrinsically safe circuits (connecting parts,
Accessory for LifeCheck ® Test Device
910 652 114531 462 0.064 1 Stk. 72.00 e.g. terminals)!
LifeCheck-Sensor für DRC BXT When using the Ex i partition of type TW DRC MCM EX, this dis-
LifeCheck snap-on sensor and test module for use as spare part tance is also maintained if the surge protective devices are
/ extension for portable LifeCheck test devices. With snap-on arranged directly next to one other.
feature! PU Part
Type pc(s). No.
PU Part
Type Testing of pc(s). No. TW DRC MCM EX 1 910 697
LCS DRC BXT BLITZDUCTOR XT ML 1 910 652
910 654 114548 462 0.045 1 Stk. 72.00
LifeCheck-Sensor für DRC BCT
LifeCheck sensor and test module for use as spare part / exten-
sion for portable LifeCheck test devices.
PU Part
Type Testing of pc(s). No.
LCS DRC BCT BLITZDUCTOR CT MLC 1 910 654
www.dehn.de 7