Page 22 - ACB-E1.2-E2.2-E4.2-E6.2

ABB | SACE Emax 2

(1)
Advanced menus The Advanced menu can be used to configure the following protections :
Name Parameters SW package
MCR Description and list in manual 1SDH001330R1002
2I Description and list in manual 1SDH001330R1002 Standard
Protections
IU Description and list in manual 1SDH001330R1002
UV (2) Description and list in manual 1SDH001330R1002
OV (2) Description and list in manual 1SDH001330R1002
UV2 (2) Description and list in manual 1SDH001330R1002 Voltage
protections
OV2 (2) Description and list in manual 1SDH001330R1002
VU (2) Description and list in manual 1SDH001330R1002
S(V) (2) Description and list in manual 1SDH001330R1002
S2(V) (2) Description and list in manual 1SDH001330R1002 Voltage Advanced
protections
RV (2) Description and list in manual 1SDH001330R1002
UF (2) Description and list in manual 1SDH001330R1002
OF (2) Description and list in manual 1SDH001330R1002 Frequency
UF2 (2) Description and list in manual 1SDH001330R1002 protections
OF2 (2) Description and list in manual 1SDH001330R1002
RP (2) Description and list in manual 1SDH001330R1002
D (2) Description and list in manual 1SDH001330R1002
RQ (2) Description and list in manual 1SDH001330R1002 Power protections
OQ (2) Description and list in manual 1SDH001330R1002
UP (2) Description and list in manual 1SDH001330R1002
OP (2) Description and list in manual 1SDH001330R1002
ROCOF
ROCOF (2) Description and list in manual 1SDH001330R1002
protections
V DIR, VINV (2) Description and list in manual 1SDH001330R1002
59 S1 (2) Description and list in manual 1SDH001330R1002 Interface
protections (IPS)
Warnings VS Warning, FS Warning, FW1 Warning
Threshold 1 I1, Threshold 2 I1, Threshold Iw1, Threshold Iw2,
Signallings Standard
(2)
Phase Sequence , CosØ (3) Protections
Functions External Trip, Trip Reset, Switch On SET B (4)
Synchrocheck Description and list in manual 1SDH001330R1002 (5)
RC Description and list in manual 1SDH001330R1002 (6)

(1) if the Adaptive Protections package is available and Dual set has been activated, an
intermediate menu where the set can be selected (Set A / Set B) will be available before the list of
protections The only menu always present via Advanced is Functions
(2) available if provided for by Trip unit model or if the relative SW package has been activated, where
possible (page 6)
(3) Cos φ available if provided for by Trip unit model or if the Power Protections package has been
activated
(4) SET B available when Adaptive Protections package is present
(5) available when Ekip Synchrocheck is present
(6) available when Rating Plug type Rc is installed in unit and when presence of toroid Rc has been
previously activated in Settings menu

20 | © 2022 ABB | 1SDH001316R1002 - ECN000232533 Ekip Touch - Interface and menus | 4 - Menu