Page 135 - General_Purpose_Enclosures _Aria, APO,Polysafe
P. 135

135




          —
          Accessories
          Passive cabinet ventilation




          The differences between ambient temperature and the temperature inside a cabinet with a high protection rating may
          generate variations in pressure. In the event of under-pressure, the cabinet may draw in dust and moisture. Any moisture
          trapped inside the cabinet will be deposited as condensation. This condensation can be prevented through the use of
          ventilation grilles.

          Product              Type       Order code    Pack   Product              Type      Order code    Pack
          IP44 ventilation grille                              IP55 pressure compensation plug
          Suitable for a ventilation opening                   Hermetically sealed cabinets and enclosures are subjected to thermal
          Includes 2 grilles and 4 nylon nails. Total insulation.  or exterior influences, which result in temperature fluctuations during
                                                               changes in pressure. Pressure compensation plugs compensate for
                                                               changes in pressure and prevent the ingress of dust and moisture. The
                                                               plug is suitable for use in electrical cabinets and enclosures, in
                                                               accordance with the DIN EN 62208 standard.
                                                               Set of 2 pieces      ACC818078  4TBJ818078R0100  1

                 2
           2000 mm  grille     PS832019   4TBP832019C0100 1    Technical specifications
                                                               Dimensions      ø 65.5 mm x 30.5 mm
                                                               Cut-out         ø 37 mm
                                                               Attachment      PG 29 threaded or nut
                                                               Material        ABS/PC
                                                               Air inlet       ±1.5 cm 2
          3000 mm  grille      PS832743   4TBP832743C0100 1
                2
                                                               Protection rating  IP55
                                                               Note:           compensation for optimal pressure revolves
                                                                               around the use of 2 plugs, diagonally opposed.
                                                                               If the plug is not installed vertically, the
                                                                               protection rating is reduced to IP54.

                2
          4500 mm  grille      PS832744   4TBP832744C0100 1






                                                               Vents - IP44 (1)
                                                              Set of 2 pieces, bore   AR831009  4TBA831009C0100 1
          IP44 vent (RAL 7035)                                diameter Ø 34.9 mm
          In order to guarantee sufficient ventilation and to avoid condensation,
          two vents must be installed; one at the top and a second one at the
          bottom. Kit includes: drilling template.
          Set of 2 polyamide pieces  PS833677  4TBP833677C0100 1




                                                              (1) If positioned in the corners of an Aria cabinet or un-
                                                              der the hood of a PolySafe cabinet




          Vents (IPx4)
          Improve ventilation and prevent condensation. Recommended
          installation above or below the cabinet - M20
                               MB861728   4TBG861728R0100 25
   130   131   132   133   134   135   136   137   138   139   140