Page 122 - Sace Emax 2 Catalogue

6/20 SACE EMAX 2 LOW VOLTAGE AIR CIRCUIT-BREAKERS

—

Accessories for Ekip trip units

All accessories are automatically recognized by
the Ekip units without the need for any specific
configuration. Based on the installation method
and connection of the trip units, the electronic
accessories can be divided into:

Installation Modules Highlights
Terminal box Cartridge modules: - The Ekip Supply module enables the trip units to be supplied with a wide range of control voltages
- Ekip Com - The Ekip supply module must be present for the other modules to be used
- Ekip Link
- Ekip Signalling 2K - The Ekip Supply module has a dedicated position in the installation area in the terminal box;
- Ekip Signalling 3T the other modules can be installed as desired in the positions available
- Ekip Supply - When fitted with the Ekip Supply module, up to 2 additional modules can be installed on E1.2, and
- Ekip Synchrocheck up to 3 on E2.2, E4.2 and E6.2
Accessorizing Ekip LCD - These are installed in specific housings from the front of the circuit-breaker
area Ekip Com Actuator - For all the trip units with a touch screen interface, an LCD version is available with any adjustment
Ekip RTC in the protection and measurements functions
Ekip AUP
Ekip Signalling 4K - Thanks to the optional modules Ekip RTC and Ekip AUP, all the Ekip trip units can acquire and
Rating Plug monitor the ready to close state and the racked-in/test isolated/racked-out position of the circuit-
Battery for Ekip breaker. The module to acquire the open/closed position is supplied as standard for all Ekip trip
units.
- The Ekip Signalling 4k module increases the remote signalling possibilities for E2.2, E4.2 and E6.2
and can be installed if the Ekip Supply module or another 24V auxiliary power supply is present
Ekip trip unit Ekip T&P - These can be connected to the front test port of the trip units even with the device in operation
test port Ekip TT - Compatible also with the SACE Tmax XT range
External Ekip Multimeter - Ekip Multimeter can supply a 24V DC output to the trip unit it is connected to
Ekip Control Panel - Several Ekip units and / or Ekip Signalling 10K can be connected at the same time to the same Ekip
Ekip Signalling 10K trip unit
Ekip Signalling Modbus
TCP
External neutral sensor - These are connected to the trip unit by the terminal box of the circuit-breaker
Homopolar toroid
Differential toroid