Page 123 - Sace Emax 2 Catalogue

ACCESSORIES 6/21

Power supply
Ekip Supply module (Fig. 23)
The Ekip Supply module supplies all Ekip trip units and modules present on the terminal box
and of the circuit-breaker with several auxiliary power (in AC or DC) available in the switchgear.
The module is mounted in the terminal box and permits the installation of the other advanced
modules. It can be field installed at any time.
Two versions are available according to the control voltage available:
• Ekip Supply 110-240V AC/DC
• Ekip Supply 24-48V DC

Supply Ekip Supply
— Ekip Dip Nominal voltage 24-48V DC 110-240V AC/DC
Fig. 23
Voltage range 21,5-53V DC 105-265V AC/DC
Rated power (including modules) 10W max. 10W max.
Inrush current ~2A for 20ms ~2A for 20ms
Ekip Touch/ Nominal voltage 24-48V DC 110-240V AC/DC
Hi-Touch Voltage range 21,5-53V DC 105-265V AC/DC
Rated power (including modules) 10W max. 10W max.
Inrush current ~2A for 20ms ~2A for 20ms

Connectivity
Ekip Com modules (Fig. 24)
The Ekip communication modules enable SACE Emax 2 circuit-breakers to be integrated in an industrial 06
communication network for remote supervision and control of the circuit-breaker. They are suitable for
all distribution and generator protection versions of the Ekip Touch and Hi-Touch trip units. Since they
are mounted in the terminal box, communication can be maintained with withdrawable circuit-breakers,
even while in the racked-out position. Several Ekip Com modules can be installed at the same time,
thereby enabling connection to communication systems that use different protocols.
The Ekip Com modules for Modbus RTU, Profibus-DP and DeviceNet™ contain a terminating resistor
and dip switch for optional activation to terminate the serial network or bus.
The Profibus-DP module also contains a polarization resistor and dip switch for its activation.
The Ekip Com modules are supplied with auxiliary position contacts Ekip AUP and
— ready to close circuit-breaker contacts Ekip RTC.
Fig. 24
For industrial applications in which a higher reliability of the communication network is required, the
Ekip Com Redundant modules can be installed together with the corresponding Ekip Com modules in
order to guarantee a back-up connection to the network.

The following communication protocols are available for Ekip trip units:

Protocol Ekip Com Module Ekip Com Redundant Module
Modbus RTU Ekip Com Modbus RS-485 Ekip Com R Modbus RS-485
Modbus TCP Ekip Com Modbus TCP Ekip com R Modbus TCP
Profibus-DP Ekip Com Profibus Ekip Com R Profibus
Profinet Ekip Com Profinet Ekip Com R Profinet
EtherNet/IP™ Ekip Com EtherNet/IP™ Ekip Com R EtherNet/IP™
DeviceNet™ Ekip Com DeviceNet™ Ekip Com R DeviceNet™
IEC61850 Ekip Com IEC61850 Ekip Com R IEC61850
Cloud connectivity Ekip Com Hub –
—
Electrical diagram reference: figures from 51 to 57. Redundant version from 61 to 66.