Page 23 - Sace Emax 2 Catalogue

THE R ANGES 2/9

—

SACE Emax 2 MS/DC-E Air switch

disconnectors at 1500 V DC – IEC RANGE 02

The SACE Emax 2 MS/DC-E IEC range has been de- Because of dedicated shorting busbar (jumper)
veloped for installations up to 1500V DC and 4000 kits, all four poles can be connected in series to
A, with short-time withstand current up to 100 kA. isolate a single polarity source, or alternatively for
a dual polarity source 2 poles can be configured in
The SACE Emax 2 MS/DC-E is compliant with series for the positive supply and the other 2
DC-PV2, the most demanding Utilization Cate- poles in series for the negative supply.
gory according to IEC 60947-3 Annex D, since it
requires the ability to connect and disconnect PV SACE Emax 2 MS/DC-E can be fitted with a vast as-
circuits where significant overcurrents may occur sortment of electrical and mechanical accessories
and where current flow can be in either direction; already available for the standard SACE Emax 2
these are common characteristics of centralized range. The IEC version has also achieved China
PV systems. CCC certification.

Common data
Rated service voltage Ue [V] 1500
Rated insulation voltage Ui [V] 1500
Rated impulse withstand voltage Uimp [kV] 12
Number of poles 4
Fixed -
Version
Withdrawable
Suitable for isolation according to IEC 60947-3
DC22A, DC-PV2
Utilization category
(Annex D)

SACE Emax2 MS/DC-E for IEC E4.2
Performance levels S H V
Rated uninterrupted current Iu @ 40°C [A] 1600 1600 1600
[A] 2000 2000 2000
[A] 2500 2500 2500
[A] 3200 3200 3200
[A] 4000 4000 4000
Rated short-time withstand current (1s) [kA] 65 85 100
Icw
Rated short-circuit making capacity 1500 V
(peak value) Icm [kA] 65 85 100
Dimensions H - Fixed [mm] 371
D - Fixed 270
W - Fixed 4p 510
H – Draw out [mm] 425
D – Draw out [mm] 393
W – Draw out 4p [mm] 551

For further detail, please consult the SACE Discover more by visiting the SACE
Emax 2 MS/DC-E technical catalogue Emax 2 MS/DC-E dedicated webpage