Page 206 - Surge-Protection-E_0.pdf

SPDs for LSA Technology

Accessories for LSA Technology
• Proven insulation displacement method
• 45° angled blades in the disconnection block ensure
a minimum change in cross-section
• Enhanced stability of the conductor
• Enhanced corrosion resistance
• Further accessories available on request

SPDs for LSA Technology The insulation displacement method is used when a large number of lines The blocks are suitable for connecting plastic-insulated wires with copper
conductor material:
need to be connected quickly and at low cost. This method is commonly
used in the telecommunications sector (e.g. Deutsche Telekom AG).
Conductor diameter: 0.4-0.8 mm
Outer diameter: 0.7-1.5 mm
After using wires with a conductor diameter of 0.65 mm, rewiring to
smaller diameters is no longer possible.

Mounting Frame
907 995 MB2 10 LSA
Mounting frame for 10 LSA blocks of the 2/10 series, total width: 104.5 mm
907 995 4013364033528 04 02 04 50 228 g
48,50 €
Type MB2 10 LSA
Part No. 907 995
Dimensions 223 x 105 x 42 mm

Insertion Tool
907 994 AW2 LSA
Insertion tool with sensor for LSA technology for connecting the wires and simultaneously cutting them to the required length. With fold-out
907 994 4013364033511 04 02 04 50 105 g
95,30 € extraction hook and blade.
Type AW2 LSA
Part No. 907 994
Colour white

Terminal Block
907 997 AL2 10DA LSA
Series 2 for LSA technology for inseparably connecting 10 pairs each on the cable and routing side. Accommodates DPL 10 G3 arresters.
907 997 4013364033542 04 02 04 50 48 g
14,50 € Parallel protective circuit only.
Type AL2 10DA LSA
Part No. 907 997
Test standards DIN 47608-1, -2
Diameter of solid conductors 0.40-0.80 mm
Conductor diameter with insulation 0.70-1.50 mm

202 You will find detailed product information on our website Valid as of August 1, 2020