Page 22 - Elko relays

20

1-PHASE CURRENT MONITORING RELAY PRI-32

- over current
- internal CT

Features:
» » Universal supply AC24 - 240V and DC 24V
»»
» » Controls only AC current
»»
» » Output contact: 1x changeover 8A
»»
»»
» » Adjustable setting 1 - 20A (max. overcurrent 5A)
» » Clamp terminal
»»
» » 1-MODULE, DIN rail mounting
»»

Functions

Technical parameters PRI-32
Supply circuit
Supply Terminals: A1 - A2
Supply voltage: AC 24-240V and DC 24V
(AC 50-60Hz)
Consumption: max. 1.5VA
Supply voltage tolerance: -15%; +10%
Measuring circuit
Current range: 1-20A Description
Current adjustment: rotary switch
Setting accuracy (mechanical): 5%
Repeat accuracy: <1%
Temperature dependancy: <0.1%/ C
0
Limit values tolerance: 5%
Hysteresis (fault to 0K): 0.6-1.2% of the range
Overload capacity: max. 5A (10s long)
Output
Number of contacts: 1x changeover, (AgSn0 2 )
Rated current: 8A / AC1
Switching capacity: 2500 VA / AC1, 240W / DC
Output indication: red LED
Other information
Operating temperature: -20.. + 55 C
0
Storage temperature: -30.. + 70 C
0
Electrical strength: 4 kV (supply - output)
Operating position: any
Mounting: DIN rail EN 60715 Connection
Protection degree: IP40
Overvoltage category: III
Pollution degree: 2
Max. cable size: max. 2.5mm /with sleeve 1.5mm 2
2
Dimensions: 90 x 17.6 x 64mm
Weight: 68g
Standards: EN 60255-6, EN 61010-1

PRI-32 is 1-phase current monitoring relay used in AC circuits. The output relay is off in the normal state. By exceeding the adjusted current level, the
relay is closed.

IPD INDUSTRIAL PRODUCTS Phone: 1300 556 601 www.ipdgroup.com.au