Page 36 - Assembly Instructions Manual

The units are delivered fully assembled as
shown in this picture
Please follow the assembly sequence starting
with 1.

FRONT VIEW

The power and control plugs can
carry maximum 42 amps. Please note
the different length of the earth pin -
auxiliary and power plugs.
BACK VIEW

1. Mount the back conduit holder profile
and side PC holder profile as shown in
the pic:1 and fix the conduit between
the two rails.

2. Knockout the slot on the outer casing
on the side that faces the cable
chamber.

3. Insert the outer casing and fix it with
screws.

30 ISSUED BY: F. P DATE: 01.10.2007 APPROVED BY: A. K DATE: 01.10.2007 REPLACES: 01.04.2005