Page 37 - Assembly Instructions Manual
P. 37
4. Slide the outer casing in and tighten the
screw.
Run the power cable from the back to the
cable chamber through the conduit.
Fix the cable box.
5. Insert the pre-wired control plug assembly in
through the side slot and screw in. Break the
flaps of the PC plates as required in order to take
the cables out.
6. Bend the PC retaining plate along the slotted
edge as shown. Make sure to bend it in the cor-
rect direction.
7. Break the flaps of the PC plates on the lid as
required and fix the lid.
ISSUED BY: F. P DATE: 01.10.2007 APPROVED BY: A. K DATE: 01.10.2007 REPLACES: 01.04.2005 31
