Page 383 - Din prodcuts 2020

4/29

—
Busbars and accessories for
MCBs S 200, RCDs F 200 and DS 200 series

4
Busbars PS Busbars PS…CB Busbars PS…BP Busbars PS…BP-C Busbars PS..DC
Suitable for MCB: S200, S200M, S200P MCB: S200, S200M, S200P, S200MUC, MCB: SU200M, S200UDC, S200U, S200UP MCB: SU200M, S200UDC, S200U, MCBs, Fuseholders E90
RCD: F200, DDA-blocks S200MTUC S200UP
Electrical Standards for IEC applications for IEC / UL applications for IEC / UL applications for IEC / UL applications for IEC applications
Data IEC/EN 60947-1 IEC/EN 60947-1 IEC/EN 60947-1 IEC/EN 60947-1 IEC/EN 60947-1
UL1077 UL489 UL508
Approvals — UL508 UL489 UL 489 -
Rated voltage Ue 1P, 2P, 3P, 4P: 690 V AC, 690 V DC 1P: 1000 V AC/DC 1P, 2P, 3P: 480 V AC 600 V AC/DC 690 V AC / 1000 V DC
2P, 3P: 600 V AC/DC
Rated frequency Hz 50 / 60 Hz, DC 50 / 60 Hz 50 / 60 Hz 50 Hz (IEC) / 60 Hz (UL) 50 / 60 Hz, DC
Current carrying capacity / A 10 mm 2 16 mm 2 30 mm 2 18 mm 2 25 mm 2 16 mm 2
Phase (35°C ambient End feeding 63 A 80 A 120 A End feeding ➀ 80 A 100 A 80 A (115A for cubicle size ≥ 30"x30"x10") End 100 A End 100 A
temperature) ➀ feeding ➀ feeding ➀

Non-end 100 A 130 A 160 A Non-end 160 A 200 A Non-end feeding ➀ 200 A Non-end feeding ➀ 160 A
feeding ➀ feeding ➀
Short-circuit withstand kA 25 kA in series with fuse NH3 355 A gG 500 V 10 kA 3 cycles @ 480 V / 100 kA Fuse Class J 10 kA in series with fuse NH3 355 A gG 500 V 10 kA 3 cycles @ 600 V / 140 kA Fuse 25 kA/0,1 s, 100 kA in series with fuse
2
capacity 175 A / 18 mm – 200 A / 25 mm 2 Class J 200 A NH3 355 A gG
Mechanical Housing light grey, RAL 7035
Data Enviromental conditions DIN EN 60068
acc. to
Overvoltage category III
Pollution degree 2
Installation Cross-Section Busbar 10 mm , 16 mm , 30 mm 2 18 mm ,25 mm 2 16 mm 2 25 mm 2 30 mm 2
2
2
2
Mounting position optional
Supply Feed on terminal of the device (supply side Feed on terminal of the device (supply side Feed on terminal of the device (supply side Feed on terminal of the device (supply Feed on terminal of the device (supply side optional) or
optional) or use of feeder terminal range AST; optional) or use of feeder terminals AST 35/... CB; optional) or use of feeder terminals AST 35/15 side optional) or use of feeder terminal use of feeder terminal AST 35/18 DC or AST 35/45 DC
SZ-ESK SZ-ESK SP BP; SZ-ESK BP AST 35/58 BP-C
Accessories Shock-protection caps BSK, SZ-BSK BSK CB BSK BP BSK BP-C
Feeder terminals range AST, SZ-ESK AST 35/15.. CB; AST 35/38.. CB AST 35/15 BP AST 35/58 BP-C AST 35/18 DC (for use with 1-phase busbar)
SZ-ESK SP SZ-ESK BP AST 35/45 DC (for use with 2-phase busbar)
End caps range END, PS-END, PSB-END PS-END SP; PS-END1 SP - PS-END 3 BP-C PS-END0, PS-END3
Feeder Terminals AST , SZ-ESK Feeder Terminals AST... CB Feeder Terminals AST 35/15 BP Feeder Terminals AST 35/58 BP-C
and SZ-ESK SP and SZ-ESK BP
Electrical Max. operating voltage V 690 V AC, 690 V DC AST.. CB 1000 V AC/DC; SZ-ESK SP 690 V AC/DC 480 V AC 1000 V AC/DC
Data
Current carrying capacity / A see below ➀ 115 A ➀ 115 A ➀ 115 A use 75° wire
phase 95 A use 60° wire
2
2
2
2
Cross-Section mm 2 SZ-ESK 6 - 35 mm 100 A SZ-ESK SP 35 mm / 2AWG flexible SZ-ESK BP 35 mm / 2AWG flexible AST 35/58 BP-C 28mm / 2AWG
with ferrules with ferrules
2
2
6 - 50 mm 125 A 50 mm / 1AWG solid / 50 mm / 1AWG solid / stranded
2
stranded
mm 2 AST 6 - 25 mm 80 A AST.. CB 35 mm / 2AWG flexible AST 35/15 25 mm / 3AWG flexible
2
2
2
with ferrules BP with ferrules
6 - 50 mm 125 A 50 mm / 1AWG solid / 35 mm / 2AWG solid / stranded
2
2
2
stranded
Instruction of When cutting the busbar, ensure that the When cutting the busbar, ensure that the Cutting of busbar is not permitted. Shock protection only with mounted The copper bus has to be cut to a length that is app.
installation insulation profile exceeds the copper bar by installation profile exceeds the copper bar by end caps ensured. For DC applications 10 mm less than the corresponding length of the plastic
approx. 10 mm on each side. Shock protection approx. 10 mm on each side. the required increased clearence and busbar housing. Toch-safe only when used with the
only with mounted end caps ensured. Shock protection only with mounted end caps creepage distances needs to be required end caps. Independant from the rated voltage
For DC applications the required increased ensured. ensured. of the devices like busbars or feeder terminals the
clearence and creepage distances needs to be creepage distances and distances over the air needs to
ensured. be considered. This is depending on the particular
application as well as on the complete assembling.
➀ In case of feed in from the middle of the busbar it needs to be ensured, that the sum of junction currents per side must not exceed the max busbar current Is/phase.
Irrespective of the current carrying capacity (Is) of the busbar, the max. rated current of the devices terminal may not be exceeded.
Feed in from the end of the busbar Feed in from the middle of the busbar