Page 181 - Sace Emax 2 Manual for design engineers

ABB | SACE Emax 2
2 - Standard accessories

Accessories for fixed circuit- Fixed version SACE Emax 2 circuit-breakers and switch-disconnectors are always supplied with the following
breakers accessories as standard:
• IP30 protection for the switchgear door
• lifting plates for E2.2-E4.2-E6.2 circuit-breakers
• front terminals for E1.2 circuit-breakers
• orientable rear terminals for E2.2-E4.2-E6.2 circuit-breakers, mounted in HR – HR position
• screws for mounting in switchboards
In addition, for automatic circuit-breakers only, the following accessories are always supplied:
• four standard open/closed auxiliary contacts - AUX 4Q
• four terminals for the auxiliary connections
• mechanical signalling for protection trip unit tripping - Ekip TU Reset
• Ekip TT power supply and test unit, when a protection unit is present on display
• Ekip protection trip unit tripping signalling contact S51

Accessories for withdrawable Withdrawable version SACE Emax 2 circuit-breakers and switch-disconnectors are always supplied with the
circuit-breakers following accessories as standard:
• anti-extraction locking mechanism with the circuit-breaker closed
• lifting plates for E2.2-E4.2-E6.2 circuit-breakers
• racking-in/racking-out lever
• anti-insertion lock
In addition, for automatic circuit-breakers only, the following accessories are always supplied:
• four standard open/closed auxiliary contacts - AUX 4Q
• four terminals for the auxiliary connections
• mechanical signalling for protection trip unit tripping - Ekip TU Reset
• Ekip TT power supply and test unit, when a protection unit is present on display
The fixed parts of the withdrawable versions are always supplied with:
• IP30 protection for the switchgear door
• anti-insertion lock
• standard shutter lock - SL
• screws for floor mounting
• orientable rear terminals

179 | © 2020 ABB | 1SDH001330R1002 - ECN000134959 - Rev. A Accessories | 2 - Standard accessories