Page 220 - Sace Emax 2 Manual for design engineers

ABB | SACE Emax 2
Information in menu The following information will be available in the About-Modules menu if Ekip Touch has detected the module
correctly:
Information Description
SN and version Identifier and SW version of the module
Address of the module, assigned to the module by a DHCP server at the time of
connection to the network in the case of configuration with a dynamic IP, or can be
IP address set via the menu in the event of a static IP.
NOTE: without a DHCP server, the module automatically adopts a random IP
address within the 169.254.xxx.xxx range
Subnet mask; identifies the method for recognizing the subnet to which the modules
Network Mask
belong and enables modules to be searched for within a defined set of recipients.
IP address of the node to which the module is connected, in the presence of several
Gateway address
subnets
Address assigned by ABB, with OUI (Organizationally Unique Identifier) equal to
MAC address
ac:d3:64, which uniquely identifies the manufacturer of an Ethernet device

Remote configurations Additional parameters can be accessed via the service connector (via Ekip Connect) or via a system bus
communication:
Parameter Description Default
Allows the CRL (Certificate Revocation List) to be used to ascertain
CRL Enable
whether the server certificate is valid
Clock update
hardening Enables control of the time reference transmitted by the SNTP server
enable
SNTP Server Enables the position of the SNTP server to be set in relation to the
Location network in which the module is installed
SNTP Time zone Defines the time zone to be used for synchronism +00:00
SNTP Daylight Used to select whether daylight saving time is present (ON) or not OFF
Saving Time (OFF) in the country to which the synchronization time refers
Permits (Enabled ARP) the periodic generation of a Gratuituos ARP
Disable message, used by Ekip Connect to rapidly find the modules via ARP Enabled
Gratuitous ARP
Ethernet scan without knowing the IP address beforehand

218 | © 2020 ABB | 1SDH001330R1002 - ECN000134959 - Rev. A External electronic accessories | 10 - Ekip Com Hub