Page 43 - Sace Emax 2 Manual for design engineers

ABB | SACE Emax 2
Measurements

Figure 13

If provided for by Trip unit model, the Measurements pages contain a list of measurements acquired in real
time, expressed in absolute value:

Page Name Measurements
1 Current Currents: phase, earth fault, external/Rc earth fault
2 Voltage Voltages: line-to-line, phase, neutral
3 Active power Phase and total active powers
4 Reactive power Phase and total reactive powers
5 Apparent power Phase and total apparent powers
6 Energy counters Total active, reactive and apparent energies
7 Power Controller Power Controller measurement summary, if installed
8 Load shedding Summary of Load Shedding measurements, if present
9 Ekip Signalling 3T Summary of Ekip Signalling 3T module measurements, if present

Ekip Touch configuration involves certain exceptions:
• the Ne current measurements are available with 4P and 3P + N configurations
• the phase voltage measurements are available with the 4P and 3P + active external neutral voltage
configuration
• with the 3P configuration, pages: Active Power, Reactive Power and Apparent Power are replaced by the
Powers page with the total active, reactive and apparent power measurements
• Ige/Rc current available with external sensor activated
• Power Controller page available with Power Controller function activated
• Load Shedding available with Load Shedding function activated
Press the sides of the display to browse the pages; press the HOME key to quit.
NOTE: each page can be set as the main page by pressing HOME, holding it for five
seconds and confirming the message on the display

41 | © 2020 ABB | 1SDH001330R1002 - ECN000134959 - Rev. A Ekip Touch - Interface and menus | 3 - Graphic pages