Page 145 - MCCB-XT5

ABB | SACE Tmax XT

Configurations via menu Local bus activation, which is essential for starting the communication between module and Ekip Touch,
is available in the Settings menu (page 117).
The following communication parameters can be configured if the module has been correctly detected by
Ekip Touch in the Settings-Modules menu:
Parameter Description Default
Defines whether the module has the dynamic (Off) or static (On)
Static IP IP address. Off
address ON
Se = On all the associated parameters are enabled
Static address Enables the static IP to be selected 0.0.0.0
IP address
Static Network Enables the subnet mask to be selected 0.0.0.0
Mask
Static Gateway When there are several subnets, enables the IP address of the
address node to which the module is connected to be selected 0.0.0.0

Information in menu The following information will be available in the About-Modules menu if Ekip Touch has detected the
module correctly:
Information Description
SN and version Identifier and SW version of the module
Address of the module, assigned to the module by a DHCP server at the time
of connection to the network in the case of configuration with a dynamic IP, or
IP address can be set via the menu in the event of a static IP.
NOTE: without a DHCP server, the module automatically adopts a random
IP address within the 169.254.xxx.xxx range
Subnet mask; identifies the method for recognizing the subnet to which the
Network Mask modules belong and enables modules to be searched for within a defined set
of recipients.
IP address of the node to which the module is connected, in the presence of
Gateway address
several subnets
IP addresses of the client devices connected to the module (in the Server
TCP Client 1, 2, 3
mode)
Address assigned by ABB, with OUI (Organizationally Unique Identifier) equal
MAC address
to ac:d3:64, which uniquely identifies the manufacturer of an Ethernet device

143 | © 2022 ABB | 1SDH002039A1002 - ECN000212994 External electronic accessories | 7 - Ekip Com Modbus TCP