Page 154 - MCCB-XT5
P. 154

ABB | SACE Tmax XT

                            Models Two different modules compatible with the IEC 61850 protocol are available: Ekip Com IEC 61850 and Ekip
                                    Com IEC 61850 Redundant.
                                    The modules are identical in terms of characteristics and installation methods, except for: display menus,
                                    cabling and addresses for system communication, which are specific for each module.
                                           NOTE: if different indications are not given, the information in the next chapter is valid for
                                           both models
                                    The two modules can be connected at the same time to Ekip Touch so as to expand the potential of the
                                    unit (e.g. for applications where high grid reliability is required).
                                           IMPORTANT: each Ekip Touch can be fitted with only one module per type. The configuration
                                           with two modules of the same model is not allowed (example: two Ekip Com IEC 61850
                                           Redundant)


                       Connections
                                    For references about the connection and terminals, please consult document 1SdM000005A1001; a cable
                                    of the Class 6 S/FTP type (Class 6 with double screening S/FTP) must be used for the communication
                                    bus.
                                    To connect the module to Ekip Supply and Ekip Cartridge, please consult document 1SdH002009A1503.


                      Power supply Ekip Com IEC 61850 is supplied directly by the Ekip Supply module to which it is connected..
                                           NOTE: communication between Ekip Touch and the module is interrupted in the absence
                                           of auxiliary power supply


                          Interface the module has three signaling leds:

                                                              2                         1











                                    Figure 49
                                     LEDs           Description
                                                    Signals the on status and correct communication with Ekip Touch:
                                                     • off: module off
                                                     • on steady or flashing synchronized with the Power led of Ekip Touch: module
                                     Power
                                                    on and communication with Trip unit present.
                                                     • flashing not synchronized with the Power led of Ekip Touch (2 fast flashes
                                                    per second): module on and communication with Trip unit absent
                                                    Indicates the communication state:
                                     Link (1)        • off: incorrect connection, signal absent.
                                                     • on steady: connection correct
                                                    Indicates the communication state:
                                     Activity (2)    • off: no activity on line
                                                     • flashing: activity on line present (receiving and/or transmitting)


















       152 | © 2022 ABB |  1SDH002039A1002 - ECN000212994                External electronic accessories | 10 - Ekip Com IEC 61850
   149   150   151   152   153   154   155   156   157   158   159