Page 29 - Din prodcuts 2020

1/19 1

Contact position indication Approvals printed on the dome Housing material
All System pro M compact® MCBs are S 200 MCBs comply to IEC/EN 60898-1 By using the state-of-the-art housing
suited with a contact position and IEC/EN 60947-2 and carry all material, ABB is taking care of the
indication (CPI) on the toggle. You can relevant approval marks for each environment. With the latest
easily identify, if the MCB is in the ON market and segment they are destined generation of thermoplastics it’s
or the OFF position – easy and safe to. The certification markings are also possible to recycle the MCBs –
maintenance work is possible. printed on the dome of the MCB. Thus especially the thermoplastic housing-
make it possible to see the markings material can be re-used. By using the
also in the mounted position. For latest generation of thermoplastics
control and acceptance procedure – the material stability of all System pro
certification marks visible on fitted M compact® MCBs is improved. S200
devices on the dome. are 100% free of halogens – no
environmental pollution.

Laser printing Screwless terminals IP 20 - finger safe terminals
All printings of the S 200 and S 200 M With its unique terminal screwless The System pro M compact® MCB’s are
MCBs, like the approvals on the dome technology the S 200 S provides maxi- equiped with 35 mm² + 10 mm² cylin-
and the product identification, are mum flexibility in usage of cables. The der lift twin terminals, a well proven
printed by a laser. The laser printing screwless load side terminal enables and reliable technology - designed for
ensures a friction, scratch and solvent fast installation. High forces in the sopisticated industrial use.
resistant marking on the MCBs. screwless terminal safe time for re- The cross wiring can easily be done by
Easy identification of the products in tightening after transport of the as- inserting the System pro M compact®
case of maintenance or replacements sembled enclosure. If the wiring has to busbars into the rear terminal part and
due to safe laser printing. be changed only a soft push on the le- then the incoming wires into the front
ver is required. S 200 S provides the part of the terminal.
highest standard of safety for installer.
IP20 / IPXXB (finger safe) highest stan-
dard of touch protection.